27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72STANDARD MOLDED PLASTIC TANKSCYLINDRICAL TANKS WITH FIBERGLASS CASINGFEATURES• These are exceptionallystrong, durable tanks designedespecially for those extra-toughjobs: For example, where evena very slight bulge cannot betolerated because of volumetriccalibration, for solutions of highspecific gravity, or where extrasafety is desired. The rugged,seamless 7110 and 7120 Seriestanks serve as liners. Thefiberglass-reinforced polyestercasings provide added strengthand rigidity; they never needpainting or maintenance.7115 CYLINDRICAL TANKS LINEARPOLYETHYLENE LINER, FIBERGLASS CASINGFEATURES• These products withstandcontinuous operatingtemperatures of up to 200°F.The hard, smooth finish of theLPE liners is easily cleanedand abrasion-resistant. Thecasing is 3/16” thick.• The standard covers arepolyethylene; glass-coveredcovers are available uponrequest.ORDER: 7115.(Size No.)7115 7113Tanks CoversSize Capacity I.D. xNo. (Gal.) Depth (in.)506 3 9-1/2 x 9 $101.92 $8.42001 5 11 x 14 113.67 9.39512 6 11 x 16 119.44 9.39501 7.5 12 x 16 133.55 10.21002 10 13 x 20 188.58 10.21003 15 15 x 21 217.29 12.65034 17 18 x 16-1/2 240.39 16.87006 30 18 x 29 346.84 16.87011 55 22 x 34 514.93 20.27013 65 22 x 40 559.86 20.27016 80 24 x 48 748.03 26.93020 100 27 x 42 869.56 30.32030 150 31 x 48 1,141.14 33.72040 200 36 x 48 1,400.56 59.04055 275 42 x 48 1,848.85 59.03072 360 48 x 48 2,249.25 84.21100 500 52 x 60 2,906.82 100.94770.170.1107125 CYLINDRICAL TANKS POLYPRO LINER,FIBERGLASS CASINGFEATURES• These tanks are generallymore chemically resistant thanothers listed. They withstandcontinuous operatingtemperatures of up to 250°F(not recommended for use insub-freezing temperatures).The casing is 3/16” thick.NOTE: Polypropylene tanks donot have the impact-resistancenor the clean, smooth appearanceof polyethylene tanks. Thestandard covers are polyethylene;fiberglass-covered covers areavailable upon request.770.180.110ORDER: 7125.(Size No.)7125 7113Tanks CoversSize No. Capacity (Gal.) I.D. x Depth (in.)506 3 9-1/2 x 9 $138.18 $8.42001 5 11 x 14 154.71 9.39512 6 11 x 16 173.32 9.39501 7.5 12 x 16 208.18 10.21002 10 13 x 20 230.43 10.21003 15 15 x 21 249.90 12.65034 17 18 x 16-1/2 303.37 16.87006 30 18 x 29 430.65 16.87011 55 22 x 34 641.90 20.27013 65 22 x 40 777.14 20.27016 80 24 x 48 865.87 26.93020 100 27 x 42 954.23 30.32030 150 31 x 48 1,265.31 33.72040 200 36 x 48 2,330.00 59.04055 275 42 x 48 --- 59.03072 360 48 x 48 3,329.00 84.21TANK STANDS FOR CYLINDRICAL TANKS770.190.120 Flat 770.320.120 ConicalFEATURES• These heavily braced steel stands are designed to support the full liquid load of the tanks we sell, and feature an improved corrosion-resistantepoxy coating. The stands for 500-gallon tanks have six legs. The tank stands are designed to bear the load of liquids with SG similar to water.Flat-Bottom Tank StandsConical-Bottom Tank Stands7164 7165 7168R 7162C 7169R 7163CStands w/AgitatorStands w/AgitatorStands SupportStandsSupportSize Capacity Height (in.)* ConicalNo. (gal.) Bottom Tanks001 5 24 $162.02 $190.63 - - - -002 10 24 198.08 243.10 270.08 179.00 338.54 218.00003 15 24 279.16 324.03 270.08 182.00 338.54 255.00006 30 24 315.08 359.96 359.96 238.00 435.67 289.00011 55 24 333.12 396.02 431.94 281.00 526.74 351.00016 80 -- 449.99 522.00 497.07 358.00 - -020 100 24 486.05 549.10 539.99 358.00 626.30 414.00030 150 24 521.98 603.05 - - - -040 200 17 557.89 630.03 585.02 588.00 711.12 667.00053 250 24 - - - 635.00 - 728.00055 275 24 675.03 809.92 - - - -072 360 24 765.07 891.00 - - - -100 500 24 891.25 1,064.94 - 1,075.00 - 1,289.00* Height at tip of tank cone. All flat-bottom tank stands are 24” high overall to elevate tanks 24”.7168R, 7162C, 7169R, and 7163C series tank stands are associated with specific size tanks. Contact Ryan Herco FlowSolutions to assure you have the right tank stand for your tank.For flatbottomtanksFor conicalbottomtanksINSTALLATION NOTES• If the tank will be subjected to heavy loads or stress. . .Place the tank on a smooth flat surface. Maintain complete bottom support atall times, regardless of the type of tank involved. Support the sides of all largerectangular tanks, except those with fiberglass casings, to prevent bulging andthe subsequent increased stress. Supports should be built to the individualtanks to insure an exact fit.• Mount agitators, heaters and other heavy equipment on independent structuralmembers.• Keep any immersion heaters a safe distance from the tank wall (minimum 1/2”).Safety dictates that a low-level cutoff switch be installed in tanks using heaters.Contact your RHFS Service Center for suitable devices.• Protect the tank from impact, particularly at temperatures below 40°F. For lowtemperature service, specify cross-linked P.E. tanks.• Do not subject tanks to continuous operating temperatures exceeding thoselisted.• Use tanks in accordance with the chemical resistance data given in theEngineering section in the back of the catalog.534