27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72NEPTUNE PLANETARYGEAR DRIVE MIXERSFEATURES• Neptune’s originalline of gear-driven420 RPM clampmountmixers forheavy fluids and slurriesor large batches of thin liquids.• Square pitch 1.0 ratio marinepropellers are used exclusively.Flow coefficients and powerconsumption characteristicsequal those of the best hydrofoilimpeller designs.• 316 SS propellers and shaftsstandard.• No clutches to slip, wear or replace.• Vibration-absorbing pad standard.• Gears run in grease, giving quietoperation.• Bearings are permanently lubricatedfor quiet operation and extended life.• Cast aluminum housing.• Motors are available in TEFC orExplosion-Proof enclosures (1750RPM, 56C frame). Air motors are alsoavailable.• Universal indexing clamp allows mostefficient mixer positioning.• FOB shipping point.ACCESSORY ITEMS• Variable speed 42 to 420 totallyenclosed non-ventible RPM(TENV) motors using DC motor/control package.• Fixed cup plate mount optional.• Optional shaft coatings such asrubber, PVC or Teflon available.• Optional shaft diameters andlengths (1”, 1-1/4”; 84”, 96”).GEAR DRIVE MIXER ORDER INFORMATION:6662.1(Size No.) TEFC MOTOR, SINGLE PROPELLER6662.2(Size No.) TEFC MOTOR, DOUBLE PROPELLERDimensions(in.) ShaftLength ADimensions(in.) PropellerSingle CDimensions(in.) PropellerDual CDimensions(in.) ShaftDiameter D828.110.120-140SinglePropellerDualPropeller6662.1 6662.2SizeNo.Standard MotorDescriptionDimensions(in.) B00 1/3 HP - 1 - 115/230 48 20-1/8 6 6 1 $1,818.00 $1,862.0002 1/3 HP - 3 - 230/460 48 20-1/8 6 6 1 1,771.00 1,820.0010 1/2 HP - 1 - 115/230 48 20-1/8 11 10 1 1,847.00 2,134.0012 1/2 HP - 3 - 230/460 48 19-1/4 11 10 1 1,830.00 2,121.0020 3/4 HP - 1 - 115/230 60 20-1/8 12 11 1 2,005.00 2,357.0022 3/4 HP - 3 - 230/460 60 20-1/8 12 11 1 1,999.00 2,350.0030 1 HP - 3 - 230/460 60 20-1/8 13 11 1-1/4 2,174.00 2,386.0040 1-1/2 HP - 3 - 230/460 60 20-1/8 14 12 1-1/4 2,422.00 2,485.006663.1(Size No.) EXPLOSION PROOF MOTOR, SINGLE PROPELLER6663.2(Size No.) EXPLOSION PROOF MOTOR, DOUBLE PROPELLERDimensions(in.) ShaftLength ADimensions(in.) PropellerSingle CDimensions(in.) PropellerDual CDimensions(in.) ShaftDiameter DSinglePropellerDualPropeller6663.1 6663.2SizeNo.Standard MotorDescriptionDimensions(in.) B01 1/3 HP - 1 - 115/230 48 20-1/8 6 6 1 $1,960.00 $2,005.0003 1/3 HP - 3 - 230/460 48 20-1/8 6 6 1 2,175.00 2,221.0011 1/2 HP - 1 - 115/230 48 22-7/8 11 10 1 2,033.00 2,321.0013 1/2 HP - 3 - 230/460 48 20-1/4 11 10 1 2,227.00 2,515.0021 3/4 HP - 1 - 115/230 60 23-7/8 12 11 1 2,328.00 2,546.0023 3/4 HP - 3 - 230/460 60 20-1/4 12 11 1 2,376.00 2,731.0031 1 HP - 3 - 230/460 60 24-1/2 13 11 1-1/4 2,503.00 2,713.0041 1-1/2 HP - 3 - 230/460 60 21-1/2 14 12 1-1/4 2,719.00 2,780.006664.1(Size No.) AIR MOTOR, SINGLE PROPELLER6664.2(Size No.) AIR MOTOR, DOUBLE PROPELLERSingle DualPropeller Propeller6664.1 6664.2DimensionsDimensions Dimensions DimensionsSize(in.) Shaft Dimensions (in.) Propeller (in.) Propeller (in.) ShaftNo. Standard Motor Description Length A (in.) B Single C Dual C Diameter D04 1/3 HP Air - Air Rqmt: 20 CFM @ 40 PSi 48 20-1/8 6 6 1 $1,867.00 $1,912.0014 1/2 HP Air - Air Rqmt: 20 CFM @ 40 PSi 48 16-1/8 11 10 1 1,909.00 2,196.0024 3/4 HP Air - Air Rqmt: 30 CFM @ 60 PSi 60 16-1/8 12 11 1 2,070.00 2,420.0032 1 HP Air - Air Rqmt: 40 CFM @ 40 PSi 60 17-1/4 13 11 1-1/4 2,384.00 2,594.0042 1-1/2 HP Air - Air Rqmt: 55 CFM @60 PSi60 17-1/4 14 12 1-1/4 2,547.00 2,610.00PROPER MIXER MOUNTING & POSITIONINGIn most applications involving small mixing tanks of 1000 gallons or less, the mixer is clamped to the side ofthe tank. Optimum mixing will be achieved when the mixer is angled from the tank wall, either off center (figure1) or on center (figure 2). Improperly mounting a portable mixer will greatly lessen mixing efficiency, causevibration and could possibly damage the mixer.Angling off center is preferred when good material turnover is required, as in mixing a slurry. Angling oncenter is desired for more gentle mixing and when vortexing must be minimized.Larger size tanks may require that a mixer be mounted directly in the center of the tank with the shaft vertical(figure 3). When a mixer is used in this arrangement, baffles are recommended to prevent the contents of thetank from turning in the direction of the mix. If this occurs, mixing action will be poor.Such baffling will avoid vortexing and allow mixing to be as thorough as possible. Neptune suggests that fourbaffles be used, located 90° apart and sized approximately 1/12 of the tank diameter. The baffle should not fullyextend to the bottom of the tank and a gap should be provided between the baffle and the tank wall.Figure 1: Angling the portablemixer off center is the positionrecommended for rapid turnoverof tank contents and good bottomwashing.Figure 2: On center anglingwill produce good mixingwith minimum vortexing. Tankcontents turn over thoroughlybut gently.Figure 3: For mixing in larger tanks, themixer is often placed vertically on center. Inthis configuration, baffles are recommendedto prevent the contents of the tank fromrotating, avoid vortexing and achieve goodmixing and top-to-bottom turnover.584