27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

LUTZ DRUM & BARREL PUMPSSEAL-LESS PUMP TUBESFEATURES• High Performance• Runs Dry Without Damage• Seal-less series pump tubes can run dry without damage toeither the pump or motor.• A patented Teflon sleeve prevents the material fromprogressing up the pump shaft.• Impeller design maximizes performance on high-viscosityand high-specific-gravity material.• The motor and pump tube must be ordered separately. Anymotor listed and described on the previous page will assembleto any Lutz pump tube described below.ORDER: 6505.(Size No.) SEAL-LESS PUMP TUBESize LengthType of Hose PriceNo. (in.) Material Seal Connection Each216 27 Polypro Seal-less 3/4” $328.00516 39 Polypro Seal-less 3/4” 356.00416 47 Polypro Seal-less 3/4” 368.00217 27 Stainless Seal-less 1” 505.00517 39 Stainless Seal-less 1” 572.00417 47 Stainless Seal-less 1” 605.00218 27 Kynar Seal-less 1” 550.00318 39 Kynar Seal-less 1” 650.00418 47 Kynar Seal-less 1” 692.00ORDER: 6505.(Size No.) SEALED PUMP TUBE670.110.110SizeNo.Length(in.) MaterialType ofSealHoseConnectionPriceEach211 27 Polypro Mechanical 3/4” $309.00511 39 Polypro Mechanical 3/4” 373.00411 47 Polypro Mechanical 3/4” 383.00212 27 316 SS Mechanical 1” 505.00512 39 316 SS Mechanical 1” 572.00412 47 316 SS Mechanical 1” 605.00215 27 Aluminum Mechanical 1” 410.00515 39 Aluminum Mechanical 1” 432.00415 47 Aluminum Mechanical 1” 386.30670.110.120LAB PUMP AND MOTORFEATURES• Designed for emptyingsmall quantities of wateror other non-hazardousliquids from carboysor other narrow-neckcontainers, this Lutzlaboratory drum pump isavailable in three models:Polypropylene with a 25”or 34” tube and stainlesssteel with a 34” tube.The maximum flow is 16GPM, and the maximumhead is 24 feet.• These models areoffered with kits thatinclude a wall bracket, curved spout, five feet of PVC hose,two hose clamps and a quick-release nozzle.• The pumps’ light weight—four pounds for the Polypro model,five pounds for the stainless—makes them easy to handle.The single-phase open motors, which are 110-120VAC, 50/60Hz, have thermal overload protection with a mechanical reset.The liquids to be handled must not exceed 380-centistokeviscosity and 1.4 specific gravity.• The Polypro models have a Polypropylene inner and outertube with a Hastelloy-C drive shaft, a Teflon shaft sleeve anda polypro rotor. The stainless models have a stainless inner/outer tube with a stainless drive shaft, a Teflon shaft sleeveand a Teflon rotor.ORDER: 6508. LABORATORY DRUM PUMP & MOTOR216 Polypropylene, 25” tube $400.00316 Polypropylene, 39” tube 458.00317 Stainless Steel, 39” tube 630.00236 Polypropylene, 25” tube, with kit 510.00336 Polypropylene, 39” tube, with kit 568.00337 Stainless, 39” tube, with kit 740.00670.120.1106505.517Tube6506.000Motor6500.000Motor6505.511Tube6503.000Motor6505.211TubeALSO AVAILABLEDRUM & BARREL PUMP ACCESSORIES• Hand Regulator Nozzle(Available in Polypro, PVDF, & Stainless Steel)• Polypro Fume Barrier• Battery Operated Lab Pump & Motor(Polypropylene 39” tube, available with kit)• Batch Controller for Drum Pump.Contact your local Ryan Herco Flow Solutions ServiceCenter for details at 1-800-848-1141MOTORS:Order separatelyfrom page 488.Pumps and containers should beproperly grounded to eliminate thepossibility of electrostatic discharge.1-800-848-1141www.rhfs.com489