27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

GRIDWALK HIGH STRENGTHMOLDED FRP GRATINGFire resistant. Impact resistant. Easy maintenance.GRIDWALK HIGH STRENGTH FRPSTAIR TREADSFEATURES• FRP stair treads are molded in a 1-1/2” square pattern, with asolid, non-skid nose which stands up to industrial punishmentand long use. Your local Ryan Herco Flow Solutions ServiceCenter carries standard sizes, which can be trimmed to replaceexisting steps. For widths of 40” or more, a center supportis required. All FRP stair treads will safely support a movingconcentrated load of 1000 pounds, as required by OSHA.ORDER: 1968.(Size No.) FRP STAIR TREADSize No. Thick. (in.) Size Weight (lbs.) Price Each312 1-1/2 9-1/4” x 12 35 $274.75412 1-1/2 10-1/2 in. x 12 ft. 46 301.00512 1-1/2 12-1/4 in. x 12 ft. 52 346.50336 1-1/2 9-1/4 in. x 36-1/2 in. 10 70.00436 1-1/2 10-1/2 in. x 36-1/2 in. 13 103.25536 1-1/2 12-1/4 in. x 36-1/2 in. 15 80.50ACCESSORIES910.140.110Contact your local Ryan Herco Flow Solutions Service Center for afull range of accessories, including hold-down clips, FRP structuralsupports, ladders, guard rails and other fiberglass products.GRIDWALK HIGH STRENGTHMOLDED FRP FLOOR GRATEFROM 49% TO 185% STRONGER THANCOMPETITOR’S STANDARDFEATURES• Gridwalk ® high strength fiberglass reinforced plasticgrating has been engineered not only for strength, butalso to overcome the corrosion problems normally foundin chemical, pulp and paper, electronic, plating, food,beverage, aircraft, automotive, textile, and other industrieswhere corrosive products are encountered. These areareas where metal grating rapidly deteriorates or createsa constant maintenance problem.• The advanced resin and glass systems and manufacturingtechniques employed in the production of Gridwalkfiberglass grating makes it ideal for use in harshenvironments.• This grating has a square-mesh pattern that gives twowayphysical properties for a stronger grating, and savesa tremendous amount of scrap compared to rectangularmeshgratings.• Field cutting is done easily with an abrasive cut-off wheel(masonry type) or hacksaw. Any cut edges should besealed.• The Isophthalic Polyester grating comes standard as lightgreen in color with a non-skid surface or concave.• The highly corrosive resistant Vinyl-ester grating, alsowith a non-skid surface, comes dark gray in color.APPLICATIONS• Flooring.• Walkways.• Stairs.• Bridges.• Wash Racks.• Grills.• Battery Racks.• Pit Covers.• Screens.ORDER INFORMATION:1962.(Size No.) MOLDED ISOPHTHALIC POLYESTERFRP FLOOR GRATING1963.(Size No.) MOLDED VINYL-ESTER FRP FLOORGRATING1962 1963SizeNo.Thick.(in.)SquarePattern(in.)Size(ft.) Weight (lbs.)300 1 1-1/2 4’ x 12’ 120 $577.50 $675.50350 1 1-1/2 3’ x 10’ 74 378.00 441.00305 1 1 x 4 3’ x 10’ 79 437.50 535.50360 1-1/4 1-1/2 4’ x 12’ 151 682.50 757.75365 1-1/4 1-1/2 3’ x 10’ 94 488.25 542.50315 1-1/2 1-1/2 4’ x 12’ 181 770.00 922.25330 1-1/2 1-1/2 3’ x 10’ 113 509.25 603.75370 1-1/2 1-1/2 5’ x 10’ 186 806.75 1,006.25345 2 2 4’ x 12’ 204 904.75 1,053.50Other sizes and colors available upon request.910.110.110 1” Isophthalic 910.130.110 1” Vinyl-ester910.110.120 1-1/4” Isophthalic 910.130.120 1-1/4” Vinyl-ester910.110.130 1-1/2” Isophthalic 910.130.130 1-1/2” Vinyl-ester910.110.140 2” Isophthalic 910.130.140 2” Vinyl-ester1-800-848-1141www.rhfs.com605