27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

SAINT-GOBAIN VERTICALBULK STORAGE TANKSVERTICAL BULK STORAGE TANKSFEATURES• Saint-Gobain vertical storage tankshave flat bottoms for easy installation.The smaller tanks (550 to 1,550 gallons)incorporate a narrow-diameter designfor space-saving bulk storage, makingthem economical for in-plant use.• Choice of two resins: XLPE (CrosslinkedPolyethylene), and HDPE (highdensityPolyethylene) and two specificgravities (1.5, 1.9).• The tanks are engineered for toughapplications. They provide excellentlow-temperature impact resistance andare UV-stabilized for outdoor use.• The fittings and other accessories canbe added as specified to meet yourrequirements. Hydrostatic testing isavailable upon request.• Sizes ranging from 550 to 6,500gallons.• Seamless construction.• Leak-proof design.• Mounting flats on the bottom portionof tank.• Tie-down lugs.• Translucent; observable liquid level;tanks up to 6,500 gallons are gray(XLPE) or natural (HDPE).• Circular top head flat for fittings(excluding the 550 gallon size).• Molded-in graduations up to 4,000gallons.• All tanks on this page F.O.B.shipping point.NOTE: The dimensions noted arenominal; the vertical tanks do notinclude fittings, which must be orderedseparately. Manways are included.Storage tanks with up to 3/4” wallthickness are translucent. However,observation of liquid level depends onfavorable light conditions, liquid colorand clean tank wall.ORDER: 7354.(Size No.) SAINT-GOBAIN VERTICAL BULK STORAGE TANK, HDPE7355.(Size No.) SAINT-GOBAIN VERTICAL BULK STORAGE TANK, XLPEManwayoptionsGraduationsGenerousradiusChoice of 5diameters7354HDPEFlat on top headfor fittingsTie-downlugsUniformwallthicknessFlats forbottomfittingsHigh-densityPolyethyleneor cross-linkedhigh-densityPolyethylene780.110.110 HDPE780.110.130 XLPESize No.Capacity(gal.)Diameter xHeight (in.)Maximum SpecificGravityWall Thickness(in.)Approx. Weight(lbs.) Manway Dia. (in.)051 550 48 x 84 1.9 .25 140 16 $974.49 $1,073.31085 850 64 x 74 1.5 .25 150 16 1,103.27 1,301.36086 850 64 x 74 1.9 .28 170 16 1,315.04 1,480.74110 1100 64 x 93 1.5 .31 190 16 1,208.98 1,389.53111 1100 64 x 93 1.9 .37 220 16 1,337.83 1,489.86155 1550 64 x 127 1.5 .34 280 16 1,779.95 2,053.66156 1550 64 x 127 1.9 .41 415 16 2,064.53 2,602.70200 2000 96 x 83 1.5 .31 320 16 2,079.65 2,390.73201 2000 96 x 83 1.9 .44 445 16 2,476.52 3,120.46250 2500 96 x 99 1.5 .38 430 16 2,858.90 3,280.30251 2500 96 x 99 1.9 .50 625 16 3,268.15 3,999.61300 3000 96 x 116 1.5 .44 620 21 3,459.99 3,975.28301 3000 96 x 116 1.9 .56 800 21 4,533.00 4,989.97302 3000 90 x 145 1.5 .44 620 21 3,459.99 3,975.28303 3000 90 x 145 1.9 .56 800 21 4,533.00 5,405.79400 4000 96 x 145 1.5 .56 850 21 5,093.41 5,848.27401 4000 96 x 145 1.9 .81 1100 21 6,201.18 7,794.21402 4000 90 x 162 1.5 .56 850 21 5,093.41 5,848.27403 4000 90 x 162 1.9 .81 1100 21 6,201.18 7,794.21550 5500 120 x 124 1.5 .58 1100 21 6,922.41 9,803.56551 5500 120 x 124 1.9 .73 1600 21 8,496.42 11,141.40650 6500 120 x 144 1.5 .69 1400 21 9,571.35 11,593.14651 6500 120 x 144 1.9 .87 1900 21 10,998.06 12,500.957355XLPESPIGOTS790.110.160 AllTYPE AFEATURES• Type A spigots are an extremely lowcostdrum faucet constructed of virginPolyethylene. The instant full-open orshut control by a quarter turn of handleprovides for fast, smooth flow for fillingcontainers. O.E.M. prices are availablefor quantities of 100 or more.7500.007 TYPE A SPIGOT, 3/4” $6.457500.020 TYPE A SPIGOT, 2” 35.24TYPE FFEATURES• Type F spigots are molded from highdensity Polyethylene for higher workingtemperatures and tougher service. Theyare equipped with a non-removable safetyhandle, and feature an EPDM O-Ring sealand knurled spout for connecting 5/8” I.D.plastic tubing. The controllable flow allowsfor fast or slow rates with precise control.7502.005 TYPE F SPIGOT, 1/2” $27.387502.007 TYPE F SPIGOT, 3/4” 29.751-800-848-1141www.rhfs.com539