27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

PULTRUDED PEDESTRIAN GRATINGA CLOSE LOOK AT PEDESTRIANGRATINGBEARING BARSFEATURES• Each bearing bar is reinforced by a core of densely packed,continuous glass fibers wrapped by a continuous glassmat. Densely packed core makes the bars very rigid andstrong—stronger, in fact, than steel for both longitudinalflexure and impact strength. The fiberglass core is wrappedwith an organic surfacing veil that creates a thick 100% vinylester surface for optimum corrosion protection.• To order, select (1) 1” or 1-1/2” thickness, (2) width and length.Example: 1970-013 is 1” thick x 4 ft. wide x 12 ft. long.ORDER: 1970.(Size No.) PULTRUDED PEDESTRIANGRATING PANEL, GraySize No. Size (Thk x W x L) Price Each001 1” x 3’ x 8’ $441.28002 1” x 3’ x 10’ 551.61003 1” x 3’ x 12’ 661.93011 1” x 4’ x 8’ 588.38012 1” x 4’ x 10’ 735.47013 1” x 4’ x 12’ 1,103.21021 1” x 5’ x 8’ 735.47022 1” x 5’ x 10’ 919.34023 1” x 5’ x 12’ 1,103.21101 1-1/2” x 3’ x 8’ 487.46102 1-1/2” x 3’x 10’ 609.32103 1-1/2” x 3’x 12’ 731.18111 1-1/2” x 4’ x 8’ 649.94112 1-1/2” x 4’ x 10’ 812.43113 1-1/2” x 4’ x 12’ 974.91121 1-1/2” x 5’ x 8’ 812.43122 1-1/2” x 5’ x 10’ 1,015.53123 1-1/2” x 5’ x 12’ 1,218.64PEDESTRIAN STAIR TREADVinyl-Ester, Gray1972.003 1” x 12” x 12 ft. $323.621972.013 1-1/2” x 12” x 12 ft. 341.95“D” shaped nosing is used for both 1” and 1-1/2” tread.910.190.110 1”910.190.120 1-1/2”910.170.110 1” 910.170.120 1-1/2”ACCESSORIES1971.006 SEALING KIT (for 100-150 feet of cut ends) $30.691958.202 FRP SEALANT, Quart can 74.30Size% OpenAreaApprox. Weight(lbs./sq. ft.)Max. SuggestedContinuous Span (in.)1” 33% 2.2 421 - 1/2” 33% 2.6 56910.210.140 AllCURB ANGLE1971.212 1” x 1-1/2” x 20 ft. $164.861971.213 1-1/2” x 1-1/2” x 20 ft. 176.99May be used with both pedestrian and wheel grating.% Open Approx. Weight Max. SuggestedSize Area (lbs./sq. ft.) Continuous Span (in.)1” 50% 1.6 361 - 1/2” 50% 1.9 48910.180.110 1” 910.180.120 1-1/2”INSTALLATION KITSORDER INFORMATION:PEDESTRIAN HOLD-DOWN & CONNECTOR KITS1971.410 STAINLESS STEEL INSERT PANELCONNECTOR KIT (For both 1” and 1-1/2”)1971.112 1” STAINLESS STEEL SADDLE CLIPCONNECTOR1971.113 1-1/2” STAINLESS STEEL SADDLECLIP CONNECTOR$18.6113.2114.75910.200.120 1”, Connector Kit910.200.130 1-1/2”Weldable type316L stainlesssteel hold down.Stainless steelunderbar or loadbearingmember.1/4” x 1/4” hex headbolt with 1 nut and 1washer.One stainless steel hold downis used when connectingsections or when used foranchoring.Stainless steelinsert hold-down.Stainless steelunderbar or loadbearingmember.1/4” x 1/4” hex head boltwith 1 nut and 2 washers.Three stainless steel insertsare used when connectingsections at mid span; one canbe used for anchoring, usetwo for up-lift conditions.1-800-848-1141www.rhfs.com607