27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

More documents

Recommendations

Info

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72CHEM-PRO DIAPHRAGMMETERING PUMPMATERIALS OF CONSTRUCTIONWetted Components• Diaphragm:Teflon, (Teflon coated Hypalon)• Pump head & adapters: PVDF (natural)• Injection / Check valveBody & insert:PVDF (natural)Check ball:CeramicSpring: Hastelloy C-276Elastomers (O-ring): Viton® (optional EP)• Foot valve/ Strainer: PVDF / polypropylene (natural)• Suction Tubing:PVC (clear)Non-Wetted Components• Enclosure:413 Aluminum (powder coated)• Pump head cover:413 Aluminum (powder coated)• Cover screws:300 Stainless Steel• DFD system sensor pins: Hastelloy C-276• Power cord:3 conductor, SJTW-A waterresistant• Mounting bracket (optional): Stainless steelFEATURES• Diaphragm failure detection.• Variable speed.• Output, feed rate (dosing) up to 42 GPH (158 LPH), 1,004 GPD(3,802 LPD).• Output pressures to 175 PSI.• Operator friendly digital touch pad, easy to read back lit LCDdisplay and display diaphragm failure alarm.• Two series to choose from: C3F Standard unit, C3V Includesexternal communications input and junction box.• NEMA 4X and IP66 rated enclosure.• Washdown.APPLICATIONS• Water treatment• Chemical injection• Neutralization• DosingSPECIFICATIONS• Max working pressure: 175 psig (12.1 bar)• Max fluid temperature: 130°F (54°C)• Max ambient temperature: 14° to 115°F (-10° to 46.1°C)• Output adjustment range: 1-100% in 1% increments• Turndown ratio: 100:1• Accuracy:+/- 2% full scale• Duty cycle:Continuous• Maximum viscosity: 1,000 Centipoise• Maximum suction lift: 15 ft. Water, 0 psig (4.5 m, 0 bar)• Enclosure:NEMA 4X, (IP66)• Voltage (amp draw): 115VAC/60Hz, 1ph (1.5 amp max)• Power Cord Plug Type: 115V60Hz = NEMA 5/15 (USA)ALSO AVAILABLE230 VAC models, extended mounting brackets.ORDER INFORMATION: 62131.(Size No.) CHEM-PRO C3F SERIES DIAPHRAGM METERING PUMP62132.(Size No.) CHEM-PRO C3V SERIES DIAPHRAGM METERING PUMPSize No.VoltageMax Outputat 0 PSIGPH (LPH)Max PressurePSI (Bar)Max Outputat Max PSIGPH (LPH)Strokesper Min62131Price Ea.62132Price Ea.141 115V / 60Hz 9.7 (36.7) 175 (12) 4.9 (18.6) 62 $1,350.00 $1,550.00142 115V / 60Hz 18.4 (69.7) 150 (10.3) 14.6 (55.2) 62 1,350.00 1,550.00151 230V / 60Hz 9.7 (36.7) 175 (12) 4.9 (18.6) 62 1,350.00 1,550.00152 230V / 60Hz 18.4 (69.7) 150 (10.3) 14.6 (55.2) 62 1,350.00 1,550.00161 220V / 50Hz 9.7 (36.7) 175 (12) 4.9 (18.6) 62 1,350.00 1,550.00162 220V / 50Hz 18.4 (69.7) 150 (10.3) 14.6 (55.2) 62 1,350.00 1,550.00241 115V / 60Hz 19.7 (74.6) 150 (10.3) 11.3 (42.6) 130 1,350.00 1,550.00242 115V / 60Hz 42 (159) 80 (5.5) 34.7 (131.4) 130 1,350.00 1,550.00251 230V / 60Hz 19.7 (74.6) 150 (10.3) 11.3 (42.6) 130 1,350.00 1,550.00252 230V / 60Hz 42 (159) 80 (5.5) 34.7 (131.4) 130 1,350.00 1,550.00261 220V / 50Hz 19.7 (74.6) 150 (10.3) 11.3 (42.6) 130 1,350.00 1,550.00262 220V / 50Hz 42 (159) 80 (5.5) 34.7 (131.4) 130 1,350.00 1,550.00590.380.140416
ALL-PLASTIC METERING PUMPCALIBRATION COLUMNSFEATURES• Calibration columns are an easyto use method for determiningmetering pump flow rate usingindustry standard graduations ofmilliliters/minute and gallons/hour.• An equal starting point for bothgraduated scales gives theoperator both ml/min. and GPH inone test.• High contrast blue letteringenhances readability in all lightconditions, and all scales havea protective mylar lamination toprotect against chemical attack.• All sizes feature ruggedconstruction using industrial gradePVC fittings.590.900.250ORDER INFORMATION:5880.(Size No.) ALL-PLASTIC CALIBRATION COLUMNSColumnDiameter(in.)OPERATING INSTRUCTIONS1. Install calibration column on the suction side of pump as shown on the drawing.2. With valve A open and the pump operating, open valve B slowly until fluid level reaches the0 mark.3. Close valve A and begin timing with a stopwatch or wristwatch secondhand.4. At the one minute mark, observe the fluid level. This is the actual pump flow rate in ml/min.and GPH.5. When not in use calibration column should be drained, valve B closed, and valve A opened.SAF-T-FLO CHEMICAL INJECTION NOZZLESFEATURES• Flow instantly stopped in both directions upondisconnection.• No harmful spray, leak or spillage of chemicals.• Safely transfer highly toxic and corrosivechemicals.• Waterline connection has built-in ball checkvalve to prevent back flow from waterline intochemical reservoir.• Water treatment engineers and plant operatorsnow have an injection nozzle specifically designedto safely inject sodium hypochlorite and othercorrosive chemicals without leakage, sprayingor spillage of the chemical being transferred.After years of research and development,working with engineers and plant operators, thisinjection nozzle has been developed specificallyfor the water treatment industry. Until nowengineers and plant operators had to deal witha bronze heavy duty corporate stop with PVCtubing that is difficult to use. It may leak or sprayOverallLength(in.)SizeNo.Size(ml) GPHConnectionsFNPTPriceEach002 1 100 0 - 1.5 1/2 12-1/2 $51.48004 1-1/4 250 0 - 4 1/2 16-1/4 58.08008 2 500 0 - 8 3/4 16 64.68016 2 1000 0 - 16 3/4 25 72.60032 3 2000 0 - 32 1 24 170.28064 3-1/2 40000 0 - 64 1 34 187.44the operator and or equipment with chemicalfluid and could possibly “take off” if not properlysecured.• The injection nozzle has a special valve thatinstantly stops the flow of chemical fluid in bothdirections upon disconnection.APPLICATIONS• Water treatment.• Chemical injection.• Wastewater treatment.• Pump stations.• Safe alternative to corporate stops.SPECIFICATIONS• Available in PVC or 304 SS.• Wetted materials of construction: PVC/ Viton/Hastelloy C or 304 SS/ EPDM. Six inch nozzlelength standard.• Chemical supply end: 1/2” MNPT standard.• Nozzle insertion end: 3/4” MNPT standard.ALSO AVAILABLELMI ELECTRONICMETERING PUMPSSaf-T-Flo chemical injectionnozzles are also ideal for usewith LMI electronic meteringpumps, found on pages 424-426.ORDER INFORMATION6033.100 PVC CHEMICAL INJECTION NOZZLE Hastelloy C Spring,PTFE Teflon Ball & Seat, 150 PSI Working Pressure6033.200 304 SS CHEMICAL INJECTION NOZZLE SS Spring, PTFETeflon Ball & Seat, 250 PSI Working Pressure$369.08281.48590.900.2301-800-848-1141www.rhfs.com417
Page 1 and 2:
www.rhfs.com1-800-848-1141Locations
Page 3 and 4:
GET THE RHFS ADVANTAGE!Extensive Pr
Page 5 and 6:
RYAN HERCO flow solutionsFiltration
Page 7 and 8:
RHFS SERVICE CENTERSCall your most
Page 9 and 10:
NW 87thCt.NW 102nd St.RHFS SERVICE
Page 11 and 12:
SECTIONAL PRODUCT INDEXPage 23TUBIN
Page 13 and 14:
DETAILED PRODUCT INDEXDESCRIPTIONPA
Page 15 and 16:
Page 17:
Page 20 and 21:
Ryan Herco Logo-4 Color ProcessElem
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369: Ryan Herco Logo-4 Color ProcessElem
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551:
Page 552 and 553:
Page 554 and 555:
Page 556 and 557:
Page 558 and 559:
Page 560 and 561:
Page 562 and 563:
Page 564 and 565:
Page 566 and 567:
Page 568 and 569:
Page 570 and 571:
Page 572 and 573:
Page 574 and 575:
Page 576 and 577:
Page 578 and 579:
Page 580 and 581:
Page 582 and 583:
Page 584 and 585:
Page 586 and 587:
Page 588 and 589:
Page 590 and 591:
Page 592 and 593:
Page 594 and 595:
Page 596 and 597:
Page 598 and 599:
Page 600 and 601:
Page 602 and 603:
Page 604 and 605:
Page 606 and 607:
Page 608 and 609:
Page 610 and 611:
Page 612 and 613:
Page 614 and 615:
Page 616 and 617:
Page 618 and 619:
Page 620 and 621:
Page 622 and 623:
Page 624 and 625:
Page 626 and 627:
Page 628 and 629:
Page 630 and 631:
Page 632 and 633:
Page 634 and 635:
Page 636 and 637:
Page 638 and 639:
Page 640 and 641:
Page 642 and 643:
Page 644:
Tubing & Tube FittingsInstrumentati
show all

27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Create successful ePaper yourself

Delete template?

Save as template?