27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

More documents

Recommendations

Info

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72PVC EXTRUSIONSTypical extruded PVC shapes.PVC ROUND BARFEATURES• This solid, round PVC bar stock is designedfor machining parts. The unplasticized type 1,grade 1 PVC meets or exceeds ASTM-1784.The rods come oversized by three to four percent over thestated O.D., which allows you to machine down if necessary.NOTE: Only material will be replaced if porosity or voids inmaterial are encountered. Colored PVC available in manysizes. Contact your local RHFS Service Center for details.ORDER: 1610.(Size No.) PVC ROUND BAR, Gray1614.(Size No.) PVC ROUND BAR, White1611.(Size No.) PVC ROUND BAR, White1610 1614 1611Size Diameter Std. Lgth. Lbs.No. O.D. (in.) (ft.) per ft.008 1/4 (.250) 10 .029 $0.70 $0.98 $0.67012 3/8 (.375) 10 .066 0.84 1.21 0.84016 1/2 (.500) 10 .117 0.92 1.62 1.13020 5/8 (.625) 10 .183 1.12 2.49 1.73024 3/4 (.750) 10 .265 1.57 3.50 2.42028 7/8 (.875) 10 .358 2.10 4.68 3.24032 1 (1.000) 10 .471 2.77 6.16 4.27036 1-1/8 (1.125) 10 .594 3.50 - 4.51040 1-1/4 (1.250) 10 .736 4.37 - 5.59044 1-3/8 (1.375) 10 .891 5.32 - 6.84048 1-1/2 (1.500) 10 1.060 6.27 - 8.06052 1-5/8 (1.625) 10 1.244 7.53 - 9.38056 1-3/4 (1.750) 10 1.440 8.76 - 10.94060 1-7/8 (1.875) 10 1.657 9.86 - 12.31064 2 (2.000) 10 1.890 11.28 - 12.91068 2-1/8 (2.125) 5 2.128 12.24 - 13.99072 2-1/4 (2.250) 5 2.380 14.28 - 16.34076 2-3/8 (2.375) 5 2.658 16.43 - 18.82080 2-1/2 (2.500) 5 2.950 17.92 - 20.50096 3 (3.000) 5 4.240 26.54 - 30.36112 3-1/2 (3.500) 5 5.770 36.34 - 41.57128 4 (4.000) 5 7.550 45.44 - 52.01144 4-1/2 (4.500) 5 9.550 82.31 - 90.00160 5 (5.000) 5 11.700 96.31 - 105.31176 5-1/2 (5.500) 5 14.300 130.26 - 129.43192 6 (6.000) 5 17.100 155.88 - 154.80224 7 (7.000) 5 24.01 215.93 - -256 8 (8.000) 5 31.36 292.58 - -288 9 (9.000) 5 39.69 483.88 - -320 10 (10.000) 5 49.000 644.18 - -384 12 (12.000) 20 inches 74 1,488.60 * - -* Price per 20-inch length.850.160.110 Gray PVC Round Bar850.160.120 White PVC Round BarPVC ROUND BARWe will cut > 2 1/8” bar in one foot increments at no charge.PVC bar < 2 1/8” is only available in full standard lengths.Clear PVC round bar only available in full lengths.850.160.130PVC “U” CHANNEL, GRAYFEATURES• This shape can be used as a duct for fluid, wires or tubes.The type 1, grade 1 PVC conforms to ASTM-1784, and thestandard length is 10 feet.ORDER: 1632.(Size No.) PVC “U” CHANNELSize No. Size (in.) Width x Ht. x Wall Lbs. per ft. Price per ft.*005 0.51 x 0.59 x 0.060 .027 $0.98010 0.944 x 1.570 x 0.080 .090 2.62025 2.510 x 1.456 x 0.080 .119 3.62035 3.540 x 0.787 x 0.100 .140 4.20*Additional sizes are available: minimums apply.Sold in full lengths only.870.160.110PVC HOLLOW BAR, GRAYFEATURES• This heavy-wall tubular stock is used for machinedparts, such as bushings and sleeves. Theunplasticized PVC hollow bar is stocked in type 1,grade 1 and meets or exceeds ASTM-1784. The dimensionsof the O.D. are minimum, and I.D. dimensions are maximum.ORDER: 1615.(Size No.) PVC HOLLOW BARSize No.DiameterO.D. x I.D.Avg. lbs.per ft.Std. Lgth.(ft.)Priceper ft.*080 1.625 0.562 1.154 10 $10.69095 1.900 0.906 1.410 10 12.67115 2.125 0.750 2.010 10 18.24130 2.250 1.125 2.025 10 18.09145 2.375 1.000 2.393 10 21.66155 2.500 1.000 2.680 10 23.68160 2.500 1.500 2.209 10 19.71170 2.625 1.500 2.511 10 22.16180 2.750 1.000 3.299 10 29.77200 3.000 1.000 3.976 10 34.90205 3.000 1.250 3.770 10 33.13212 3.000 2.000 2.798 10 24.56225 3.250 1.250 4.506 10 39.56240 3.500 1.500 5.037 10 44.26245 3.563 1.500 5.245 10 46.54270 4.250 1.750 7.452 10 65.39285 4.500 2.000 8.099 10 71.12295 4.750 3.000 7.069 10 62.03310 5.000 3.000 8.217 10 77.87320 5.563 4.000 7.954 5 75.42340 6.000 2.437 15.200 5 148.29345 6.000 4.000 11.190 5 109.71360 6.625 2.875 18.030 5 176.74365 6.625 4.000 14.910 5 142.01385 8.625 5.750 21.400 5 217.73* Sold in full lengths only.CLEAR PVC ROUND BARORDER: 1609.(Size No.) CLEAR PVC ROUND BAR850.120.110Size No. Diameter O.D.Std. Lgth.(ft.) Lbs. per ft.Priceper ft.008 1/4 10 .029 $0.95012 3/8 10 .066 1.32016 1/2 10 .117 1.54020 5/8 10 .183 2.41024 3/4 10 .265 3.49028 7/8 10 .358 4.71032 1 10 .471 6.20* Sold in full lengths only.598
PVC EXTRUSIONSPVC HEX BAR, GRAYFEATURES• This solid hexagonal PVC bar stock is perfect for machiningparts, such as bolts, nuts and bushings. It is stocked in Type1, Grade 1 PVC, which meets or exceeds ASTM-1784. Itstolerance across flats is ±.030” through 1.125”, and .035” for1.25” to 2”. Only material will be replaced if porosity or voidsin material are encountered.ORDER: 1620.(Size No.) PVC HEX BARSizeNo.Size Across Flats(in.)Std. Lgth.(ft.) Lbs. per ft.Priceper ft.*014 7/16 (.438) 10 .108 $1.18016 1/2 (.500) 10 .142 1.40018 9/16 (.563) 10 .180 1.62020 5/8 (.625) 10 .222 2.11024 3/4 (.750) 10 .320 2.89026 13/16 (.813) 10 .375 3.50028 7/8 (.875) 10 .435 3.99032 1 (1.000) 10 .569 5.12036 1-1/8 (1.125) 10 .721 7.72040 1-1/4 (1.250) 10 .890 9.55044 1-3/8 (1.375) 10 1.080 11.64048 1-1/2 (1.500) 10 1.283 13.88064 2 (2.000) 10 2.280 24.59* Sold in full lengths only.PVC ANGLE, GRAY850.200.110FEATURES• This reinforcing angle is used in PVC fabrication, or in placeof steel in corrosive environments. It’s manufactured in Type1, Grade 1 PVC to meet or exceed ASTM-1784. The standardlength is 10 feet.ORDER: 1627.(Size No.) PVC ANGLESizeNo. Size (in.) Lbs. per ft.Priceper ft.*001 1/2 x 1/2 x 0.080 .052 $0.89002 3/4 x 3/4 x 0.080 .074 1.08003 1 x 1 x 1/8 .141 1.73005 1-1/4 x 1-1/4 x 3/16 .214 2.17010 1-1/2 x 1-1/2 x 3/16 .316 2.50015 2 x 2 x 1/4 .576 4.59018 3 x 3/4 x 1/8 .268 3.48020 3-1/2 x 3-1/2 x 1/4 1.170 13.8Additional sizes are available: minimums apply. 880.130.110* Sold in full lengths only.PVC JOINING STRIP, GRAYFEATURES• The product is slotted to accept PVC solvent cement and rigidsheet stock to make side or corner joints when fabricatingtanks, hoods, etc. The Type 1, Grade 1 PVC conforms toASTM-1784; standard lengths are 10 feet.ORDER: 1623.(Size No.) PVC JOINING STRIPSizeNo. Size (in.) Description Lbs. per ft.Priceper ft.*104 1/8 H-Strip .219 $2.21106 3/16 H-Strip .248 2.78108 1/4 H-Strip .260 3.44204 1/8 90° Strip .403 4.04206 3/16 90° Strip .413 4.43208 1/4 90° Strip .466 4.52* Sold in full lengths only.870.170.120PVC SQUARE BAR, GRAYFEATURES• This solid square PVC bar stock is ideal for reinforcementor machined parts. It’s stocked in rigid Type 1, Grade 1 PVCthat meets or exceeds ASTM-1784. Its dimensional toleranceacross flats is ±.030” in 1/2 to 1” sizes, ±1/16” in 1.25” to1-1/2”, +.075”/-.020” in 2”. Only the material is replaced ifporosity or voids are present.ORDER: 1630.(Size No.) PVC SQUARE BARSizeNo. Size (in.)Std. Lgth.(ft.) Lbs. per ft.Price perft.*016 1/2 (.500) 10 .157 $1.25024 3/4 (.750) 10 .360 2.72032 1 (1.000) 10 .629 4.82040 1-1/4 (1.250) 8 1.033 8.35048 1-1/2 (1.500) 8 1.646 13.37064 2 (2.000) 8 2.452 21.22128** 4 (4.000) 1 meter 9.890 436.06192** 6 (6.000) 1 meter 22.230 951.72** Priced by length (one meter).* Sold in full lengths only.850.230.110PVC SQUARE TUBE, GRAYFEATURES• This new, rigid Type 1, Grade 1 PVC product meets orexceeds ASTM-1784, and is useful in fabricating corrosionresistantproducts. The standard length is 10 feet.ORDER: 1634.(Size No.) SQUARE TUBINGSizeNo. Size (in.) Width x Ht. x Wall Lbs. per ft.Priceper ft.*025 3/4 x 3/4 x 1/16 .111 $1.44050 1-3/8 x 1-3/8 x 3/32 .315 3.89075 2 x 2 x 3/32 .369 4.49085 3 x 3 x 3/32 .738 8.59Additional sizes are available: minimums apply.* Sold in full lengths only.860.130.110PVC RECTANGULAR TUBE, GRAYFEATURES• This rigid Type 1, Grade 1 PVC shape is stockedto make a wide variety of corrosion-resistantproducts. It meets or exceeds ASTM-1784, and its standardlength is 10 feet.ORDER: 1636.(Size No.) PVC RECTANGULAR TUBINGSizeNo. Size (in.) Width x Ht. x Wall Lbs. per ft.Priceper ft.*020 2 x 1 x 3/32 .275 $3.50040 4 x 2 x 3/32 .789 9.58* Sold in full lengths only.860.110.110PVC T-SECTION, GRAYFEATURES• This new support or reinforcing shape is now available inType 1, Grade 1 PVC. It meets the requirements of ASTM-1784. and the standard length is 10 feet.ORDER: 1625.(Size No.) PVC T-SECTIONSizeNo. Size (in.) Lbs. per ft.Priceper ft.*010 1-1/4 x 1-1/4 x 5/32 .215 $2.38020 2 x 2 x 3/16 .456 6.12* Sold in full lengths only. 900.110.1101-800-848-1141www.rhfs.com599
Page 1 and 2:
www.rhfs.com1-800-848-1141Locations
Page 3 and 4:
GET THE RHFS ADVANTAGE!Extensive Pr
Page 5 and 6:
RYAN HERCO flow solutionsFiltration
Page 7 and 8:
RHFS SERVICE CENTERSCall your most
Page 9 and 10:
NW 87thCt.NW 102nd St.RHFS SERVICE
Page 11 and 12:
SECTIONAL PRODUCT INDEXPage 23TUBIN
Page 13 and 14:
DETAILED PRODUCT INDEXDESCRIPTIONPA
Page 15 and 16:
Page 17:
Page 20 and 21:
Ryan Herco Logo-4 Color ProcessElem
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 482 and 483:
Page 484 and 485:
Page 486 and 487:
Page 488 and 489:
Page 490 and 491:
Page 492 and 493:
Page 494 and 495:
Page 496 and 497:
Page 498 and 499:
Page 500 and 501:
Page 502 and 503:
Page 504 and 505:
Page 506 and 507:
Page 508 and 509:
Page 510 and 511:
Page 512 and 513:
Page 514 and 515:
Page 516 and 517:
Page 518 and 519:
Page 520 and 521:
Page 522 and 523:
Page 524 and 525:
Page 526 and 527:
Page 528 and 529:
Page 530 and 531:
Page 532 and 533:
Page 534 and 535:
Page 536 and 537:
Page 538 and 539:
Page 540 and 541:
Page 542 and 543:
Page 544 and 545:
Page 546 and 547:
Page 548 and 549:
Page 550 and 551: Ryan Herco Logo-4 Color ProcessElem
Page 644: Tubing & Tube FittingsInstrumentati
show all

27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Create successful ePaper yourself

Delete template?

Save as template?