27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

SIGNET i-GO 8058SIGNAL CONVERTERSignet’s i-Go Signal Converters shown above(3-8058-1 Wire-Mount top, 3-8058-2 DIN-railbottom).SPECIFICATIONS• Input: 4-20mA current loop, passive (externalpower required).• Input range: 3.6 to 22.1 mA.• Output: Digital (S³L) output. 3-8058-2:Calibrated mA.• Power required: 4.5 to 6.5 VDC < 3.0 mA.• Max. voltage: 35 VDC.• Max. current: 40 mA.• Isolation: Up to 48 Volts AC/DC.• Voltage drop: 5 VDC max.• Standards and approvals: CE.487.110.140FEATURES• Accepts any 4-20 mA signal andconverts it into the +GF+ Signetdigital (S³L) serial data format.• Connects additional measurementparameters to +GF+ Signet 8900Multi-Parameter instrument (see pg332).• Connects with level, temperature,pressure and multi-parameter+GF+ Signet instruments and othermanufacturers’ transmitters.• When used with the 8900Multi-Parameter Controller, themeasurement type and operatingrange are defined in the 8900 setupmenu.• The wire-mount single-channelversion is easily mounted anywherein the interconnecting wiring betweenthe sensor and the instrument.• The DIN rail mounted dual-channelversion can convert one or twoseparate 4-20mA inputs into adigital (S³L) output.• Compatible sensors: All sensorswith 4-20mA output.• Compatible Signet instruments:+GF+ Signet 8250, 8350, 8450 and8900.• Up to two 4-20mA sensor inputs.APPLICATIONS• Dissolved oxygen monitoring andcontrol in wastewater.• Chlorine dioxide for disinfection.• Ozone monitoring.• Toroidal conductivity.• Chlorine injection control.• Tank level monitoring.• Turbidity and suspended solidsmonitoring.ACCESSORY ITEMS• S-Converter.• SC - Special CableORDER INFORMATION:5908.100 WIRE-MOUNT CONVERTER WITH SHORT CABLE,For use with the Signet 8900 Multi-Parameter Controller5908.200 DIN RAIL MOUNT CONVERTER(Cable not supplied), For use with the Signet 8900 Multi-Parameter Controller$197.00293.00EXTERNAL RELAY MODULESignet 8059 External Relay Module compatiblewith Signet 8900 multi-parameter controller.FEATURES• Modules supplement the output capabilities of+GF+ Signet.• AC-powered versions accept universal linevoltage, and also provide 24 VDC output thatcan be used to power the host instrument orother device(s). The host instrument controlsrelay operation by way of a single S³Lconnection.• Compact plastic housing is DIN rail mountableand includes LED annunciators for each530.140.200relay, plus one each for power-onand data transfer or test mode.• External relays controlled by hostinstrument.• Red LED annunciators for eachrelay.• Green LED indicators for power andS³L data transfer.• Relays may be tested locally, andalso via the host instrument.• AC and DC powered versions.• DC power output (AC versions).• DC power pass-through (DCversions) to simplify wiring.• S³L pass-through to simplifysensor wiring.• CE and UL listed.SPECIFICATIONS• Input: S³L (Signet Sensor SerialLink). via host instrument.• Enclosure material: Noryl ® UL 94V-O.• Enclosure type: DIN rail mountable.• Terminals: Standard screw-type.• Shipping weight: 0.8 lb. (0.37 kg).• Power - 8059-2AC, -4AC: 100-240VAC ± 10%, 50/60 Hz, 20VA.• Power - 8059-2, -4: 12 to 24 VDC.• DC output - 8059-2AC: 24 VDCregulated, 300 mA.• DC output - 8059-2: Pass-through:DC input minus 0.7 volts (12VDC in= 11.3 VDC out).• DC output isolation: > 5,000 Vrms.• Relay type: SPDT 250VAC / 30VDC/ 5A.• Relay resolution: 2 ms (in pulsemode).• Relay response time: < 100 ms.• Relay annunciators: Red LED, 1 perrelay.• Relay maximum cable: 400 ft. (122m) total S³L wiring.• Storage temperature: -4° to 185°F(-20 to 85°C).• Operating temperature: 14° to 131°F(-10 to 55°C).ORDER INFORMATION:5907.770 EXTERNAL 2-RELAY MODULE (3-8059-2) $212.005907.771EXTERNAL 2-RELAY MODULE WITH POWERSUPPLY (3-8059-2 AC)319.001-800-848-1141www.rhfs.com331