27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

PALL STAINLESS STEELFILTER HOUSINGSIOL SERIES FILTER HOUSINGSFEATURES• Single cartridge housing accepts AB style, singleopen end filter elements.• All stainless steel materials of construction.• Accepts 1” (2.54 cm), 5” (12.7 cm), 10” (25.4 cm),20” (50.8 cm) or 30” (76.2 cm) Code 3, Code 7,Code 8 or Code 18 filter cartridges.• In-line inlet and outlet connections for easyinstallation.• Quick opening T-handle V-band clamp facilitatesfilter change out.• Wide choioce of inlet/outlet sizes and o-ring sealoptions.• Passivated for purity.• Stainless steel brackets and flange connectionsavailable as standard option.HOUSING SPECIFICATIONS• Design Ratings: 260 psig (17.9 bar) @100°F(40°C), 200 psig (13.8 bar) @ 300°F (150°C)NOTE: Above ratings apply to housing only. Cartridge andhousing o-ring selection may impose different and narrowerlimitations.• Materials of ConstructionHead: 316L stainless steelBowl: 316 stainless steel• Connections:Inlet/outlet: 3/4” or 1” NPT, 3/4” or 1” BSPTVent/Drain: 1/4” NPT, BSPT or BSPP• Shell O-rings: FEP encapsulated fluorocarbonelastomer, silicone elastomer, fluorocarbonelastomer, nitrile, ehtylene propylene,ethylene propylene for steam serviceIDL SERIES FILTER HOUSINGSFEATURES• Single cartridge housing accept double openend, RF and 1001 style filters.• All stainless steel materials of construction.• Accepts 1” (2.54 cm), 5” (12.7 cm), 10” (25.4 cm),20” (50.8 cm) or 30” (76.2 cm) lengths.• V-band clamp features a quick openingT-handle.• A variety of inlet/outlet sizes and o-ring sealoptions are offered.• Optional mounting brackets are available.• Stainless steel brackets and flange connectionsavailable as standard option.Pall Filtration products are not available inall geographical regions. Please contact aRyan Herco Flow Solutions filtration specialistat 1-800-547-1033 for availability.HOUSING SPECIFICATIONS• Design Ratings: V-band clamp design: 260psig (17.9 bar) @100°F (40°C), 200 psig (13.8bar) @ 300°F (150°C), 114 psig (7.9 bar) @347°F (175°C)NOTE: Above ratings apply to housing only. Cartridge andhousing o-ring selection may impose different and narrowerlimitations.• Materials of ConstructionHead: 316L stainless steelBowl: 316 stainless steel• Connections:Inlet/Outlet: 3/4” or 1” NPT, 3/4” or 1” BSPT,1” BSPPVent/Drain: 1/4” NPT, BSPT or BSPP• Shell O-rings: FEP encapsulated fluorocarbonelastomer, silicone elastomer, fluorocarbonelastomer, nitrile, ehtylene propylene,ethylene propylene for steam serviceIDO SERIES FILTER HOUSINGSFEATURES• Positive cartridge sealing minimizes fluidbypass.• Accepts 4” (10.2 cm), 10” (25.4 cm), 20” (50.8 cm)or 30” (76.2 cm) M3 (Code 3) style cartridges.• Unique housing design has no internal parts.• Tri-clamp sealing requires no special tools toopen or close housing.• Design permits visual inspection of cartridgeseal prior to closing housing.• Optional tri-clamp brancket allows easy cartridgereplacement.HOUSING SPECIFICATIONS• Design Ratings: 175 psig (12.1 bar) @ 150°F (66°C)NOTE: Maximum operating pressure ratings are vesselratings only. Safe operating temperature and pressure willdepend on filter cartridge and gasket/o-ring used.• Materials of ConstructionHead: 316L stainless steelBowl: 316 stainless steelTri-clamp: 316 stainless steelVent plug: 316 stainless steelDrain plug: 316 stainless steel• Interior Finish: #4 Final finish• Connections:Inlet/Outlet: 3/4” NPTVent: 1/8” NPTDrain: 1/4” NPT• Shell O-rings: EPDM (standard), neoprene,FEP, silicone elastomer, Buna-N, Viton A1-800-848-1141www.rhfs.com509