27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

STANDARD STRIP CHART RECORDERSeries 800 strip chart recorder.ACCESSORY ITEMS• NEMA 4 rated enclosure.• 6-roll box of replacement paper.• Black bezel for panel mounting included.SUBSTITUTE ITEMS• 240 VAC or 12 VDC units available.• Circular chart recorder.• Paperless chart recorder.560.135.110 Recorder560.140.140 PaperFEATURES• Stylus records on pressure-sensitivepaper; no messy ink or pens.• Ideal for indoor process record keepingof process parameters.• 30 strikes per minute.• Standard 0-14 pH or 0-100% scale.• 31 days of information on a single 2-9/16”wide x 62’ long roll.• Compact size.• Standard units 120 VAC, 60 Hz.• Accepts standard input signal.• Other scales selectable at time of ordering:Please note when placing order.APPLICATIONS• Process control of pH, temperature andother parameters.• Record management.• Quality control.• Regulatory compliance.• Laboratory.• Industrial waste monitoring.• Marine/ aerospace.• Waste discharge.• Acid neutralization.REPLACEMENT PAPERSPECIFICATIONS• Pen response speed: 1 second fullscale. Stylus strikes chart once in twoseconds. Dot density depends on chartspeed.• Accuracy: ±2% of span for DC andtemperature inputs.• Power supply: 120 VAC, 60 Hz, 3Wnominal standard.• Chart size: 2-9/16” wide x 62’ long,2-1/8” active width (65 mm wide x 19 mlong, 54 mm active width).• Housing size: 3-5/8” wide x 5-5/8” highx 4-5/8” depth (92 mm wide x 143 mmhigh x 111 mm depth).• Bezel: Black metal bezel for panelmounting included in the unit price.• Paper: Charts are 2-9/16” (65 mm) wide,63’ (19 m) long, with 2-1/8” (54 mm)active recording width. Unit comes withchart installed, replacements available(6 rolls per box).• Scale: Selectable by the customer attime of order. Preset 0-14 pH standard.ORDER: 5956.(Size No.) STRIP CHART RECORDERSize InputMfg. Model Standard PriceNo. Range Input Type No. Scale Each101 4-20 mA DC Current 800-101 0-14 pH $897.23102 0-100 mV DC Voltage 800-102 0-14 pH 897.23103 0-1 V DC Voltage 800-103 0-14 pH 897.23201 4-20 mA DC Current - 0-100% 800.00202 0-100 mV DC Voltage - 0-100% 800.00203 0-1 V DC Voltage - 0-100% 800.00ADJUSTABLE PRESSURE SWITCHESFEATURES• Adjustable pressure switch can beused to start or stop pumps, open orclose valves, control pressure in tanksor any number of applications wherepressure is important to processcontrol.• The switch can be wired eithernormally-closed or normally-open forincreasing or decreasing pressure.5956.900 6-ROLL BOX OF REPLACEMENT PAPER $136.92• 1/2” FPT conduit with 1/2” FPTmounting on bottom.• No metal contact with liquid. Vitondiaphragm isolates corrosive chemicalsand vapors from the electronics.• Pressure switches are factory presetand are adjustable by turning set screwat top. Manual override is used to resetswitch after activation.• Rated 25 amps.ORDER INFORMATION:5415.(Size No.) ADJUSTABLE PRESSURE SWITCHSPECIFICATIONS• Operating Pressure Range: 0 to 150PSIG.• Temperature Range:0°F to 140°F for PVC.0°F to 180°F for Polypro.0°F to 280°F for PVDF.• Electric Switch:1 HP 125 VAC UL Approved2 HP 250 VAC UL Approved25 Amps 125 VAC UL Approved530.130.110Size No. Size (in.) Material Switch Type Price Each900 1/2 PVC Type 1, 5-40 psi $218.00901 1/2 Polypro Type 1, 5-40 psi 262.00902 1/2 PVDF Type 1, 5-40 psi 375.00903 1/2 PVC Type 2, 40-100 psi 218.00904 1/2 Polypro Type 2, 40-100 psi 262.00905 1/2 PVDF Type 2, 40-100 psi 375.00TO SET THE PRESSURE: The switch is factory pre-set at approximately 20 PSIfor Type 1 or 60 PSI for Type 2. To set for a lower pressure rotate top set screwcounterclockwise. To set for a higher pressure rotate set screw clockwise.1-800-848-1141www.rhfs.com373