27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72PACER VERTICAL CENTRIFUGALPUMPSFEATURES• Can run dry indefinitely, seal-less, nobearings.• Shaft vapor seal protects motor bearingsand atmosphere.• The seal-less vertical pump features acantilevered sleeved stainless steel shaftwhich eliminates bearings and seals,resulting in a pump that can run drywithout damage.• A vapor seal between the rotating shaftand the support column protects themotor.• The compound impeller prevents liquidfrom rising in the column, even atmaximum TDH, while the semi-enclosedbottom impeller provides efficient flowperformance at low horsepower.• Standard models are injection molded ofnatural Polypropylene, CPVC or PVDF.• All models include mounting plate 1 , vaporseal, Viton suction O-ring, stainless steelshaft and fasteners.• You can’t damage the pump bycontinuous operation against a shutoffdischarge.• No maintenance of mechanical seals orshaft bearings. These pumps will evenhandle slightly abrasive solutions.• No seals: The seal-less design eliminatesa major problem area for most pumps.There are no seals to wear out, meaningno leakage of expensive chemicals.• These pumps are designed to have thewet end immersed in the fluid beingpumped, so that it is not necessary toprime before pumping.12Models in PVDF use a Polypropylene mountingplate. For all other models, the mounting plate is thesame material as the pump.Model OS1 and OSS1 have integral motor shaft.APPLICATIONS:• Plating.• Wet processing.• Acids.• Chemicals.• Fume scrubbers.• Printed wire boards.• Cleaning solutions.SPECIFICATIONS• Capacity: To 80 GPM or 68 ft. TDH@ 60 Hz (252 LPM or 14.4 m @ 50Hz).• Materials of construction: CPVCconstruction - w/ Viton O-ringto 180°F (82°C). Polypropyleneconstruction: - w/ Viton O-ringto 150°F (66°C). PVDF (Kynar)construction: - w/ Viton O-ring to260°F (127°C).• All pumps supplied with TEFC 3450RPM motors.Model Suction DischargeOS1, OSS1 1” NPT 1/2” NPTOS2 1” NPT 3/4” NPT660.110.110Model B G RS LC AG 1 FP 1 H JOS1, OSS1 9-3/8 4-3/16 5 7-3/4 5-15/16 4 1-1/2 2-1/4OS2 12-5/16 4-5/8 9 9 8-1/4 6-1/8 3-1/16 2-3/4Model Suction DischargeOS4, OSS6 1-1/4” NPT 1” NPTOSS7, OS8 1-1/2” NPT 1-1/4” NPT660.110.150Model G DD PW X Y Z H J AG 1 FP 1OS4, OSS6 7-3/8 3 5-7/8 3-1/2 2 1-7/8 4-1/8 2-13/16 11-1/4 7-1/4OSS7, OS8 9-1/4 3-13/16 7-5/8 4 2 2-5/8 4-1/8 3-5/8 12 7-1/4486