27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72CHEMICAL RESISTANCE OFPLASTIC TUBING & HOSEG–GoodF–Fair, some effect––No informationN–Not recommended*Predicted(S) Stress crackingpossible withPolyethylene only† Alkaline or neutral,N for acidFlexible PVC–Vinyl(Plasticized PolyvinylChloride)(Temp°F)70/140Chemfluor ®Fluoropolymer (TFE)(Temp°F)70/140Polyethylene (PE)(Temp°F)70/140Polypropylene (PP)(Temp°F)70/140Polyurethane (PU)(Temp°F)70Nylon II(Temp°F)70Acetal(Temp°F)73/180Magnesium carbonate G*/G* G/G G/G G/G G – G/Gchloride G*/G* G/G G/G G/G G G G/Ghydroxide G*/G* G/G G/G G/G G – G/Gnitrate G*/G* G/G G/G G/G G – G/Gsulphate G*/G* G/G G/G G/G N – G/GMaleic acid –/N* G/G G/G G/G G – N/NMercuric chloride N*/N* G/G G/G G/G – – G/GMercuric cyanide G*/G* G/G G/G G/G – – G/GMetallic soaps G*/– G/G G/–(S) –/– – – –/–Methyl acetate N/N G/G N/N –/– – – –/–chloride N*/N* G/G N/N N/N N G G/GMethyl ethyl ketone N*/N* G/G F/N(S) G/N N – G/GMilk G/– G/G G/– G/G G G G/GMineral oils G/N G/G F/N(S) G/F G – G/GNickel chloride G*/G* G/G G/G G/G F – G/GNickel sulphate G*/G* G/G G/G G/G – G G/GNitric acid 25% G/– G/G F/N N/N – G N/N50% G/F G/G F/N N/N – F N/N75% F/N* G/G F/N N/N – F N/N90% N*/N* G/G N/N N/N N F N/NOxalic acid G/– G/G G/G G/N G G N/NOxygen G*/G* G/G G/– –/– G G G/GPetroleum(lubricating oil) –/– G/G –/– G/N G – G/GPhenol –/N* G/G N/– G/G N N G/GPhosphoric acid 30% G/G G/G G/G G/G F G N/N50% –/– G/G G/G G/G F G N/N95% –/– G/G F/N –/– – – N/NPhosphorus trichloride–/– G/G N/N –/– – – G/GPhosphorus pentoxideG*/– G/G G/– –/– – – G/GPhotographicdevelopers G*/G* G/G G/G –/– – – G/Gemulsions G*/G* G/G G/– –/– – – G/Gfixing solutions G*/G* G/G G/G –/– – F N/NPicric acid G*/– G/G –/– –/– – – G/GPotassium bicarbonateG*/G* G/G G/G G/G G – G/Gbisulphite G/G* G/G G/G –/– G – G/Gbromate G*/G* G/G G/G G/G G – G/Gcarbonate G*/G* G/G G/G G/G G – G/Gchloride G/G G/G G/G G/G G G G/Gchromate G*/G* G/G G/G G/G G – G/Gcuprocyanide G/G G/G G/G –/– G – –ferrocyanide G*/G* G/G G/G –/– G – G/Gfluoride G*/G* G/G G/G –/– G – G/Ghydroxide 10% G/G G/G G/G G/G G – –/–conc. G/N G/G G/G(S) G/G G G G/Gnitrate G*/G* G/G G/G G/G G – G/Gpermanganate G*/– G/G G/G G/F G – N/Npersulphate G*/G* G/G G/G G/G G – G/Gphosphate G*/G* G/G G/G –/– G – –/–sulphide G/G G/G G/G G/G G G G/Gthiosulphate G/G G/G G/G –/– G – –/–Sea water G*/G* G/G G/G G/G G G –/–Silver cyanide G*/G* G/G G/G –/– – – G/GSilver nitrate –/– G/G G/G G/G G – G/GSoap solution G/– G/G G/G G/G F – G/GSodium acetate G*/– G/G G/G G/G G – G/Gbenzoate G*/N* G/G G/G G/G – – G/GG–GoodF–Fair, some effect––No informationN–Not recommended*Predicted(S) Stress crackingpossible withPolyethylene only† Alkaline or neutral,N for acidFlexible PVC–Vinyl(Plasticized PolyvinylChloride)(Temp°F)70/140Chemfluor ®Fluoropolymer (TFE)(Temp°F)70/140Polyethylene (PE)(Temp°F)70/140Polypropylene (PP)(Temp°F)70/140Polyurethane (PU)(Temp°F)70Nylon II(Temp°F)70Acetal(Temp°F)73/180Sodium bicarbonate G*/– G/G G/G G/G G – G/Gbisulphite G/– G/G G/G G/G G G G/Gbromide G*/G* G/G G/G G/G – – G/Gchlorate G*/G* G/G G/G G/G – – G/Gchloride G/G G/G G/G G/G G G G/Gcyanide G/G G/G G/G G/G G – G/Gferricyanide G*/G* G/G G/G G/G – – G/Gferrocyanide G*/G* G/G G/G G/G G – G/Gfluoride G*/– G/G G/G G/G G – G/Nhydroxide 10% G/F G/G G/G G/G – – G/G4 0 % G/N G/G G/G G/G – – G/GConc. G/N G/G G/G(S) –/– G G G/Ghypochlorite G/F G/G G/G F/N – G N/Nhyposulphate G*/G* G/G G/G –/– – – –/–metaphosphate G*/G* G/G G/G –/– – – G/Gnitrate G*/G* G/G G/G G/G G G G/Gperoxide G*/G* G/G G/G –/– – – G/Nphosphate G*/G* G/G G/G G/G – – G/G†sulphate G*/G* G/G G/G G/G G G G/Gsulphide, cond. G/G G/G G/G G/G G G G/Gthiosulphate G/G G/G G/G –/– – – G/GSoft soap G/– G/G G/G(S) –/– – – G/GStannic chloride G/G G/G G/G G/G G – G/GStannous chloride G/G G/G G/G G/G – – G/GStarch G*/G* G/G G/G G/G – – G/GStearic acid G*/G* G/G G/G G/– – G N/NSucrose G*/G* G/G G/G G/G – – –/–Sulpher, colloidal –/– G/G G/– G/G – G G/GSulpher dioxide,dry gas G*/G* G/G G/– G/G G – G/Gmoist –/N* G/G G/– –/– – – G/GSulphuric acid 10% G/G G/G G/G G/G – F N/N40% G/G G/G G/G –/– – N N/N50% G/F G/G G/G G/F – N N/N60% F/F G/G G/G –/– – N N/N70% F/– G/G G/F –/– – N N/N95% –/– G/G F/N –/– – N N/N98% N/N G/G F/N N/N N N N/NFuming N/N G/G N/N N/N – N N/NTallow G*/– G/G G/– G/G – – –/–Tannic acid G/– G/G G/G G/G F – N/NTanning extracts G*/– G/G G/G G/G – – G/GToluene N*/N* G/G N/N F/N N G G/GTransformer oil G/N G/G F/N G/N F – G/GTrichloroethylene N/N G/G N/N(S) N/N N F G/GTricresyl phosphate N*/N* G/G N/N(S) –/– N – –/–Triethanolamine G/G G/G F/N(S) F/F G – G/GTrisodium phosphate G/G G/G G/G(S) G/G G – G/GTurpentine –/– G/G F/N(S) N/N G G G/GVegetable oils G/– G/G F/N –/– G – –/–Vinegar G*/– G/G G/G G/G G – G/GWater G/G G/G G/G G/G G G G/GWetting agents G*/G* G/G G/G(S) –/– – G –/–Xylene N*/N* G/G N/N(S) N/N F G G/GYeast G*/– G/G G/N G/G – – –/–Zinc chloride G*/G* G/G G/G G/G G – N/Noxide G*/G* G/G G/G G/G – – G/Gsulphate G/G G/G G/G G/G G – G/GCAUTIONRyan Herco Flow Solutions has compiled this information from the manufacturers of the various resins as a guide for users of plastic tubing and hose for chemical service. Itmay be considered as a basis for recommendation, but RYAN HERCO FLOW SOLUTIONS MAKES NO WARRANTY AS TO FITNESS FOR A PARTICULAR PURPOSEWITH RESPECT TO ANY MATERIALS PURCHASED. Materials should be tested under actual service conditions to determine their suitability for a particular purpose.630