27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

CLASSIC DESIGN ARODIAPHRAGM PUMPSFEATURES• Non-metallic wetted materials of construction.• Bolted construction for safety & reliability.• Ease of dis-assembly/assembly.• 300-Series stainless steel external hardware.• Patented air valve eliminates shifting / freezing problems.• Quick-Dump anti-freeze valve design.• Variety of corrosion-resistant materials available.• Efficient operating design reduces air-consumption.• 5-year warranty on materials and workmanship.APPLICATIONS• Viscous and abrasive liquids• Slurries• Positive prime locations• Self-priming applications• Chemicals• Food1” Ports Non-Metallic620.210.150SPECIFICATIONS• Ratio: 1:1.• Maximum GPM (LPM): 47 (178)• Displacement gallons/cycle (liters): .72 (2.7)• Air inlet: 1/2” NPTF (f)• Fluid inlet: ANSI Class 150, 1” Pipe Flange• Fluid outlet: ANSI Class 150, 1” Pipe Flange• Max. operating pressure PSI (bar): 120 (8.3)• Suspended solids max. dia. in. (mm) 1/4” (6.4)ORDER INFORMATION: 1” 47 GPM MAX ARO A.O.D.D.Materials of ConstructionSealPricePart No. Wet End Hardware Mat’l. Ball Check Diaphragm Each6240.405 PP SS PP Santoprene Santoprene $1,035.006240.415 PP SS PP Teflon Teflon 1,232.006242.405 Kynar SS Kynar Santoprene Santoprene 1,575.006242.415 Kynar SS Kynar Teflon Teflon 2,008.00• Weight - lbs (kgs): 20.2 (9.2) Poly, 28.5 (12.9) Kynar(PVDF). For cast iron center section models, add8.5 lbs (3.8 kg).• Max dry suction lift: 14 ft (rubber fitted).PERFORMANCE CURVESPECIFICATIONS• Ratio: 1:1.• Maximum GPM (LPM): 100 (340)• Displacement gallons/cycle (liters): .72 (2.7)• Air inlet: 1/2” NPTF (f)• Fluid inlet: ANSI Class 150, 1-1/2” Pipe Flange• Fluid outlet: ANSI Class 150, 1-1/2” Pipe Flange• Max. operating pressure PSI (bar): 120 (8.3)• Suspended solids max. dia. in. (mm) 1/4” (6.4)• Weight - lbs (kgs): 62 (28) Poly, 92 (42) Kynar(PVDF).• Max dry suction lift: 14 ft (rubber fitted).PERFORMANCE CURVE1-1/2” PortsNon-Metallic620.210.160ORDER INFORMATION: 1-1/2” 100 GPM MAX ARO A.O.D.D.Materials of ConstructionSealPricePart No. Wet End Hardware Mat’l. Ball Check Diaphragm Each6240.605 PP SS PP Santoprene Santoprene $2,406.006240.615 PP SS PP Teflon Teflon 2,762.006242.605 Kynar SS Kynar Santoprene Santoprene 3,724.006242.615 Kynar SS Kynar Teflon Teflon 4,323.00SPECIFICATIONS• Ratio: 1:1.• Maximum GPM (LPM): 145 (548)• Displacement gallons/cycle (liters): .72 (2.7)• Air inlet: 1/2” NPTF (f)• Fluid inlet: ANSI Class 150, 2” Pipe Flange• Fluid outlet: ANSI Class 150, 2” Pipe Flange• Max. operating pressure PSI (bar): 120 (8.3)• Suspended solids max. dia. in. (mm) 1/4” (6.4)• Weight - lbs (kgs): 20.2 (9.2) Poly, 28.5 (12.9)Kynar (PVDF).• Max dry suction lift: 14 ft (rubber fitted).PERFORMANCE CURVE2” Ports Non-Metallic620.210.170ORDER INFORMATION: 2” 145 GPM MAX ARO A.O.D.D.Materials of ConstructionSealPricePart No. Wet End Hardware Mat’l. Ball Check Diaphragm Each6240.705 PP SS PP Santoprene Santoprene $3,384.006240.715 PP SS PP Teflon Teflon 3,837.006242.705 Kynar SS Kynar Santoprene Santoprene 6,083.006242.715 Kynar SS Kynar Teflon Teflon 6,518.001-800-848-1141www.rhfs.com443