27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72MASTERFLEX ® TUBINGPUMP SYSTEMSINDUSTRIAL/PROCESS PUMP DRIVESANALOG MICROPROCESSOR OR DIGITAL SYSTEM –Flows to 3.5 GPMFEATURES• Benchtop controller or NEMA-13 configurations.• NEMA-4X “washdown motors.”• Flow rate 0.03 to 3.5 GPM.• Flow accuracy ±0.5%.• Speed regulation better than ±0.3%.• Torque overload protection.• Dispensing/copy mode available on model 6009.320.• Remote operation available on model 6009.320.• This new modular design makes Masterflex Process (I/P)drive systems compact and lightweight. Both benchtop andNEMA Type 13 “wash-down” systems feature a NEMA-4Xpermanent magnet, 1/5 hp motor with planetary gear head.The motor measures 13.75” x 5.5” x 5.75”, and it accepts upto two Masterflex Process pump heads in either the StandardI/P or I/P Easy Load configurations.DISPENSING (6009.320 only)Simplify repetitive dispensing by filling the trial dispense sample,then pressing the dispense/copy button. All subsequent sampleswill be dispensed in the exact quantity of the first sample.MICROPROCESSOR CONTROLLERDigital system features a membrane keypad, analog systemfeatures switch and a rotary dial. The back panel, dry contactclosure allows remote control of start/stop functions usingthe optional footswitch (model 6009.320 only). Wall-mountcontrollers (models .320 & .350) include a six-foot cable foreasy connection to the motor. Both benchtop and wall-mountcontrollers come standard with a six-foot power cord.Model 6009.320 digitalwall mount.Model 6009.340analog benchtop.Microprocessor drive units shown with pump heads and tubing whichare sold separately.ORDER:6009.(Size No.) INDUSTRIAL/PROCESS PUMP DRIVESizeNo.RpmRangeControllerTypeMax HeadAccepted VAC (50-60 Hz)MICROPROCESSOR/DIGITAL SYSTEMSPriceEach320 20 - 650 Nema- 13 2 115 $2,156.25ANALOG SYSTEMS340 20 - 650 Nema- 13 2 115 1,727.50350 20 - 650 Benchtop 2 115 2,376.25580.140.140 -320 580.140.110 -340 580.140.120 -350Choose one of our Easy-Load I/P heads from page 435.NOTE: Prices include pump drive and controller. Ordershort shaft pump heads separately. See page 435INDUSTRIAL/PROCESS CONSOLE VARIABLE SPEED DRIVESFEATURES• Deliver flow rates from 0.3 to 13 LPM with Masterflex I/P (Industrial/Process) pumpheads.• 4/20 mA variable-speed control available on model .250 only.• Wide flow-control range (over 10:1 turndown).• Precise resetting of the speed control with a ten-turn potentiometer and a separateon/off available on model .250 only.• Reversible pumping.• Remote speed control from the process controller.• Requires short-shaft pump heads.ORDER: 6009.(Size No.) CONSOLE PUMP DRIVESize No. Rpm Range Remote Speed Control* Price Each150 50 - 650 No $1,487.50250 50 - 650 Yes 1,826.25*Remote 4-20mA variable speed control and 10-turn potentiometer580.140.150Console drive with 10 turn speed controland remote capabilities (pump head andtubing sold separately).NOTE: All I/P pump drives now acceptstandard and “easy load” (shortshaft) pump heads.Brushless DC drives also available.Contact your local Ryan Herco FlowSolutions Service Center for details.436