27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72HANNA INSTRUMENTSCONDUCTIVITY CONTROLLERPANEL MOUNTEDCONDUCTIVITY CONTROLLERFEATURES• Recorder output in 4 to 20 mAconfiguration.• LED indicators identify whether thecontroller is in operational mode orselection mode.• The Hanna potentiometric conductivityprobe provides automatic temperaturecompensated measurements.• Direct connection of up to 67’ (20m) without the need of intermediateamplifiers to the conductivity probe.• An auto-diagnostic test of the offsetand slope determines the status of theinstrument.• Available in four models withdifferent ranges to cover conductivitymeasurement from deionized water tobrine.ACCESSORY ITEMS• Conductivity probe.• Various conductivity calibrationstandards.ORDER INFORMATION:PANEL MOUNT CONDUCTIVITY CONTROLLER 4-20 mA OUTPUT5905.015 0.0 - 199.9 µS/cm Range, 0.1 µS/cm Resolution $578.405905.016 0.00 - 19.99 µS/cm Range, 0.01 µS/cm Resolution 578.405905.017 0 - 1999 µS/cm Range, 1 µS/cm Resolution 578.405905.018 0.0 - 199.9 µS/cm Range, 0.1 µS/cm Resolution 578.40SPECIFICATIONSPanel mount conductivity controller modelHI 943500 shown above.NOTE: Conductivity probe orderedseparately. See below and page 363for details.520.110.135015 016 017 018Range 0.0 - 199.9 µS/cm 0.00 - 19.99 µS/cm 0 - 1999 µS/cm 0.0 - 199.9 µS/cmResolution 0.1 µS/cm 0.01 µS/cm 1 µS/cm 0.1 µS/cmAccuracy (@ 20°C/68°F)Typical EMC DeviationTemp. Comp.ReadoutRecorder OutputSetpoint RelayAlarm RelayPower SupplyEncolsureEnvironmentWeight/Dimensions±2% F.S.±2.5% F.S.Automatic from 32 to 140°F (0 to 60°C) with 2% temperature coefficient4-digit LCD plus graphic symbols4 to 20 mA (isolated)One, isolated 2 A, Max. 240V, resistive load, 1,000,000 strokesOne, isolated 2 A, Max. 240V, resistive load, 1,000,000 srokes110/115V or 220/240V; 50/60 HzDIN 43 700 144 x 72 mm (5.67 x 2.83”) in back anodized aluminum.Front and back with shockproof ABS plastic and transparent cover.14 to 122°F (-10 to 50°C); RH 95% non condensing2.2 lb. (1 Kg) / 5.55 x 2.71” (141 x 69 mm)SUBMERSION/IN-LINECONDUCTIVITY PROBEModel HI 7638 conductivity probe shown above.ORDER: 5905.913 $302.40SPECIFICATIONS5905.913Temp. Comp. Automatic 32 to 122°F(0 to 50°C)Body Material Ultem ®Working Temp.32 to 248°F (0 to 120°C)Max. Pressure5 bar (72.5 psi)@ 25°C (77°F)520.120.240CONDUCTIVITY CALIBRATIONSOLUTIONSFEATURES• Standard solutions for use in calibrating a variety ofconductivity probes.• Variety of solution values to choose from.• Choice of 500 ml bottle or single use 20 ml packet.ORDER INFORMATION:5905.(Size No.) CONDUCTIVITY CALIBRATION SOLUTIONSize No. Size Conductivity ConstantPriceEach951 500 mL 12,880 µS/cm $15.60952 500 mL 1,413 µS/cm 15.60953 500 ml 84 µS/cm 15.60954 20 mL 12,880 µS/cm 27.60955 20 mL 1,413 µS/cm 27.60956 20 ml 84 µS/cm 27.60957 20 ml 6.44 ppt 27.60958 20 ml 1,382 ppm 27.60959 20 ml 1,500 ppm 27.60500.147.900362