27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72CARBON FILTER CARTRIDGESGC CARBON FILTER TUBESCOMMON FEATURES• Organic removal.• Pre-filtering.• High-grade activated carbon.• Carbon filter cartridges are a one-step carbon and filtrationtreatment. They eliminate problems associated with loosecarbon and the need for separate filtration systems.• 2.75” O.D., with 10 to 30” lengths and flow rates up to 2.5gpm (other standard lengths are also available).• They fit either single- or multi-tubed vessels. Polypro coresare standard; stainless steel is optional.• GC cartridges utilize special high-grade activated granularcarbon with a very low sulfur content. Available as porousshellcarbon cartridges and outer-wound carbon cartridges.POROUS-SHELL CARBON CARTRIDGESFEATURES• Used primarily for removing organics and particulatecontaminants from plating, acid, alkaline and hydrocarbonsolutions.• The pre-filtering outer shell is made of strong, non-corrodingpolyethylene with EPR end caps.• There are nine ounces of granular carbon per 10” length,providing an extended life up to 50% more than other carboncartridges.• Liquid flows from outside of the cartridges through carbongranules, removing organics, and finally through a threemicroninner wound layer of Polypro media for polishingdepth filtration.ORDER: 6740.(Size No.) GRANULAR CARBON TUBEWITH POROUS-SHELL FILTERSizeNo.Nom. Length(in.) Material of ConstructionCartridgeEach523 10 Polyethylene $13.25723 20 with EPDM 26.48823 30 end caps 39.74740.120.110-130Carbon treatment and filtration in one cartridge.OUTER-WOUND CARBON CARTRIDGESFEATURES• Remove undesirable tastes, odors, sediment, discolorationand chemicals from water, hydrocarbon gases and otherindustrial fluids.• Provide organic removal from plating, acid and alkalinesolutions.• Three filters in one: 1) Filters through the outer winding; 2)then through the activated granular carbon layer; 3) andthrough a five-micron polishing inner winding.ORDER: 6741.(Size No.) GRANULAR CARBON TUBEWITH WOUND FILTERSizeNo.Nom. Length(in.) Material of ConstructionCartridgeEach535 10 Polypropylene $8.97735 20 Polypropylene 17.94835 30 Polypropylene 26.91545 10 Electronic-grade 9.37745 20 Polypropylene 18.74845 30 (FDA approved) 28.08555 10 Bleached 9.12755 20 cotton 21.19855 30 (FDA approved) 27.66740.110.110-190STANDARD CARBON FILTER TUBESFOR WATERFEATURES• The clear outer netting identifies cartridges designedespecially for water. It contains approximately 3.7 oz. ofactivated carbon, and has filtration rated to 10 microns.ORDER: 6723.510 WC CARTRIDGE,9-3/4” length $7.92$6.34 each/case of 30740.130.130FOR ELECTROPLATINGFEATURES• The blue outer netting identifies cartridges specificallydesigned for electroplating solutions. They contain fourounces of sulfur-free activated carbon per 10” cartridge with7.5 micron final filtration. The tubes contain no cellulose, andare rated 3 gpm per 10”, 180°F maximum.ORDER: 6722.(Size No.) PC CARTRIDGE508, 9-3/4” length $12.24$9.18 each/case of 30709, 19-3/4” 25.12$18.84 each/case of 30740.130.110-120522