27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

MASTERFLEX ® LARGETUBING PUMP SYSTEMSFLOW RATESRPM35012 to 350Size 86Tubing7.5 (2)0.3 to 7.5(0.07 to 2)Flow Rate : Ipm (gpm)Size 88 Size 90Tubing Tubing15 (4) 30 (8)0.5 to 15 1.0 to 30(0.15 to 4) (0.3 to 8)Size 92Tubing45 (12)1.5 to 45(0.4 to 12)Flow rates vary with liquid characteristics and temperature.Variable speed pump system shown.FEATURES• These systems let you enjoy the benefitsof a tubing pump in your large fluid transferapplications and they’re ideal for pumpingshear-sensitive materials.• The new Rapid-Load pump head letsyou load tubing easily, and accepts allformulations and sizes of B/T tubing,including new sizes 86 and 88, for a wideflow range (0.3 to 45 LPM; 0.07 to 12 GPM).• An adjustable occlusion knob on the sideof the pump head adjusts the squeeze onthe tubing. For optimum performance, setocclusion at the designated setting for eachtubing size. Increase the occlusion for highpressure,priming, and vacuum applications.Reduce occlusion for low-pressureapplications and for extended tubing life. Allunits come with a 6-foot U.S. standard plug.• Model 7585.30 is a “wash-down” model.Detach the controller and mount remotelywith the included 10-foot cord. The unit alsoFEATURES a single-turn potentiometer witha three-position forward/off/reverse switch.®ORDER: 6010.(Size No.) BATCH/TRANSFER PUMPSizeNo.ModelNo.Description011 7585-30 Variable - speed wash-downreversible direct-drive.1/2 hpRpmRange Power12 to 350 115 VAC 50/60Hz, 5 APriceEach$4,798.75580.150.120 -011B/T .86 B/T .88 B/T .90 B/T .92Tubing Cross SectionsInside diameter†: in. (mm)Hose barb Size†: in. (mm)Flow range†† with 6 to 600 rpm drive: ml/minValue in () obtained with high-performance pump headMaximum pressure, continuous**Maximum pressure, intermittent**Maximum vacuum**Suction lift0.37 (9.5)3/8 (9.5)0.3 to 7.5 LPM(0.07 to 2 GPM)15 psig (1.0 bar)20 psig (1.4 bar)26” Hg (660mm Hg)29ft H 2O (8.8 mH 2O)0.5 (12.7)0.5 (12.7)0.5 to 15 LPM(0.15 to 4 GPM)0.75 (19.0)0.75 (19.0)1 to 30 LPM(0.3 to 8 GPM)25 psig (1.7 bar)40 psig (2.7 bar)26” Hg (660mm Hg)29ft H 2O (8.8 mH 2O)1 (25.4)1(25.4)1.5 to 45 LPM(0.4 to 12 GPM)†† Flow ranges are approximate – calculated under the following conditions: 0 PSIG at inlet, 0.5 PSIG at outlet: water at 72°F (22°C).† Determined under the following conditions: 0 PSI at inlet, 0.5 PSI at outlet; water circulent at 72°F (22°C).** Actual performance varies depending on tubing formulation – values shown are for firm tubing.1-800-848-1141www.rhfs.com437