27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

SAINT-GOBAIN ALL-PLASTIC LAB BLOWERSFEATURES• Resistant to corrosive vapors.• Quiet operation: below the OSHA 8-hour limit of 90 dbA.• One-year warranty.• Compact.• Come complete with motors—ready to run.• Choice of motors: totally-enclosed fan-cooled or explosionproof.• The steel stands are coated with corrosion-resistantpolyurethane paint.• For indoor and outdoor use.• Includes forward-curved impeller blades for lower-speed,low-noise operation.• Transitions permit easy attachment of industrial bloweroutlets to standard ducting.• Maximum temperature limit of 140°F (60°C).• Protect motors and drives against weather when the blowersare roof-mounted by installing weather hoods on all outdoorvertical blower discharge ducts.• Saint Gobain blowers are supplied fully assembled in acounterclockwise upblast position. Other counterclockwisepositions are available upon request. Positions can bechanged in the field.APPLICATIONS• These blowers are excellent for aggressive applicationswhere blowers can corrode.• While metal blowers rely on protective coatings that developpinholes and pores, these Saint Gobain plastic lab blowersare proven performers in many tough applications such aslab hoods and cabinets, metal finishing, electronics and chipmanufacturing, small-scale chemical manufacturing, water/waste treatment and precious metal recovery.5-5/8” Impeller1725 RPM8” Impeller1140 RPMORDER INFORMATION:2001.(Size No.) 140 to 225 cfm 3/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach075 XP PP/PVC 5-5/8 1725 1/6 115 (1) 35 $1,444.21050 TEFC PP/PVC 5-5/8 1725 1/6 115/208-230 (1) 30 1,252.372001.(Size No.) 360 to 625 cfm 3/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach175 XP PP/FRP 8 1140 1/3 115/230 (1) 55 $1,640.62155 TEFC PP/FRP 8 1140 1/3 115/208-230 (1) 47 1,322.53275 XP PVC/FRP 8 1140 1/3 115/230 (1) 57 2,144.15250 TEFC PVC/FRP 8 1140 1/3 115/208-230 (1) 49 1,652.558” Impeller1725 RPM2001.(Size No.) 710 to 1,025 cfm 1-1/4” to 1/4” static pressureSize No.MotorEnclosureMaterial Wheel/HousingInlet O.D.(in.) RPM HPPower Voltage(Phase)Approx. ShipWeight, (lb.)PriceEach150 XP PP/FRP 8 1725 1/3 115/230 (1) 50 $1,553.81100 TEFC PP/FRP 8 1725 1/3 115/208-230 (1) 42 1,247.10255 XP PVC/FRP 8 1725 1/3 115/230 (1) 52 1,881.86200 TEFC PP/FRP 8 1725 1/3 115/208-230 (1) 44 1,577.12NOTE: Do not use the above blowers with chromic, perchloric, concentrated phosphoric, nitric or sulfuric acids. For theseapplications, see the 2005 Blowers with PVC impeller wheels shown on page 216.Blower adapters can be found on page 216.200.110.120 XP, 1/6 HP 200.110.140 XP, 1/3 HP200.110.110 TEFC, 1/6 HP 200.110.130 TEFC, 1/3 HP1-800-848-1141www.rhfs.com215