27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

MICROPUMPMAG-DRIVE GEAR PUMPSMAXIMUM PERFORMANCE GEAR PUMPSERIES 5000• Flow rate to 5.2 GPM.• Differential pressure to 90 PSIG standard.• System pressure to 300 PSIG standard (1500 PSIG high).• Suction capability to 20 in. Hg when primed.• Temperature range -50° to 250°F (400°F with special trim).• 3/4” FNPT side mount ports.The Series 5000 is a magnetically coupled fluid pump head,available on a variety of adapters, to fit several standard U.S.and European motor frame sizes.WETTED MATERIALS600.180.110• Pump housings: 316 SS.• Gears:PEEK.• Gear shafts: 316 SS.• Gear shaft bearings: PEEK.• Driven magnet: totally encapsulated in PEEKand 316 SS.• Seals:Viton.MOTOR REQUIREMENTS• @ 1450 to 1750 RPM: 0.18 kw (1/4 hp) required.• @ 2800 to 3450 RPM: 0.25 kw (1/3 hp) required.Contact your local RHFS Service Center for assistance.The pump head is a positive displacement gear pump, sealedentirely by static O-rings. Two thermoplastic helical gears rotateand mesh together, carrying the fluid via the valleys betweenthe gear teeth from inlet toFlow (gpm)0 1 2 3 4 5 6outlet. Fluid output is directly8001450 RPM2800 RPM proportional to speed. Gears are7001750 RPM1003450 RPM600made of PEEK and are contained80500within precision machined 31640060 SS components.Pressure (kPa)3002001004020000 5 10 15 20 25Flow (lpm)45 psi standard differential pressure pumping water.Pressure (psig)Motor adapters are available tofit all standard frame NEMA 56C-face and IEC/ISO 63 and 71face flange motors.HIGH PERFORMANCEFEATURES• Exceptional performanceis achieved from this pump,which is similar to model 6060-416 (see page 448) except thatit does not have the speedcontrol feature.• The universal motor can run ateither 115VAC or 115VDC andprovides flows to 1.3 GPM orpressure to 80 PSIG.SUBSTITUTE ITEMS• We also offer a model for 220VAC, 50 Hz service.PUMP SPECIFICATIONS• 316 series SS body.• Teflon or Ryton gears.• Adjustable bypass.• Pump/Motor weight: 5.2pounds.• 1/8” FNPT Ports.• Teflon seals.MOTOR SPECIFICATIONS• Universal AC/DC Motor.• 115 VAC 60 Hz Single Phase.• 9,000 RPM 1.1 Amp 1/23 HP.• Changeable Brushes.• Six-foot cord on/off switch.ORDER:6060.406 SERIES 120 GEAR PUMP, Teflon Gears $904.006066.406 SERIES 130 GEAR PUMP, Ryton Gears 904.00600.110.110PUMP AND AIR MOTORFEATURES• A gear pump coupled to anair motor results in a compactunit that can safely handleflammable fluids or operate inhazardous environments. Byvarying the air pressure to them o t o r yo u a c h i eve exc e l l e n tperformance within the limitsof the curve shown.• A motor muffler is included• Proper grounding must beemployed when pumpingflammable liquids.PUMP SPECIFICATIONS• 316 series SS body.• Teflon or Ryton gears.• Adjustable bypass.• Pump/Motor weight: 3.3pounds.• 1/8” FNPT Ports.• Teflon seals.MOTOR SPECIFICATIONS• Explosion-proof Air Motor. ORDER:• Horsepower: .3.6060.955 SERIES 120 GEAR PUMP, Teflon Gears $952.00• Variable Speed.6066.955 SERIES 130 GEAR PUMP, Ryton Gears 952.00• 5-11 SCFM.• 5-80 PSIG. 600.110.120 All1-800-848-1141www.rhfs.com447