27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72JOHN GUEST PUSH-CONNECTTUBE FITTINGSIMPORTANT TIPS FOR INSTALLING FITTINGS:• Double-check the tube diameter to fitting.• Whatever the material, cut the tube squarely and clean the tube end.• Push the tube fully home into fitting, past the O-ring, until itmeets tube end-stop.• Make sure the tube does not place undue stress on the fitting.Avoid too small a radius when bending the tubing.• Test the system thoroughly before use.• Observe fitting tube tolerances:Size Tolerance Size Tolerance5/32 +0.001/-0.003 5/16 +0.001/-0.0043/16 +0.001/-0.003 3/8 +0.001/-0.0041/4 +0.001/-0.004 1/2 +0.001/-0.004ORDER:1212.(Size No.) MALE CONNECTOR, Polypro1202.(Size No.) MALE CONNECTOR, Acetal1242.(Size No.) MALE CONNECTOR, PVDFPolypro Acetal PVDFSize No. Tube O.D (in.) Thread MNPT011 5/32 1/8 - $1.25 -013 5/32 1/4 - 1.46 -021 3/16 1/8 - 1.33 -031 1/4 1/8 1.26 1.34 2.92033 1/4 1/4 1.43 1.55 2.75035 1/4 3/8 3.12 2.12 4.02041 5/16 1/8 - 1.57 -043 5/16 1/4 - 1.63 -045 5/16 3/8 - 2.36 -051 3/8 1/8 - 3.08 6.68053 3/8 1/4 2.17 2.31 5.29055 3/8 3/8 2.50 2.66 6.06056 3/8 1/2 3.89 4.13 8.01065 1/2 3/8 3.38 3.58 -066 1/2 1/2 3.65 3.86 -FEATURES• Excellent high-speed assembly: The diagrams belowillustrate the ease and simplicity of the instant push-connectprocedure.• Instant manual operation—no tools are necessary.• Easy to release when required, reusable many times over.• Produced from FDA-approved copolymers. Nitrile rubbero-ring.• Working pressure: Air: 0 to 150 PSI max. and 0-full vacuum.Water: 0 to 150 PSI max.• Operating temperature: Air: -4° to 150°F. Water: 33° to140°F.APPLICATIONS• Perfect for plastic or metal tubing, including polyethylene,polypropylene, PVDF, nylon, copper, and steel.• Ideal for compressed air, food, and liquid applications.ACCESSORY ITEMS• Premium Polyethylene tubing is also available from JohnGuest. Made to exacting tolerances, this tubing is a perfectcompliment to your Speedfit system (page 88).APPROVEDMATERIALORDER:1225.(Size No.) UNION CONNECTOR, Polypro1205.(Size No.) UNION CONNECTOR, Acetal1245.(Size No.) UNION CONNECTOR, PVDFPolypro Acetal PVDFSize No. Tube O.D (in.)011 5/32 x 5/32 - $1.70 -022 3/16 x 3/16 - 1.85 -033 1/4 1.94 2.09 4.70044 5/16 x 5/16 2.12 2.24 -055 3/8 x 3/8 2.63 2.83 8.03066 1/2 x 1/2 3.10 3.28 -REDUCING032 1/4 x 3/16 - $2.31 -041 5/16 x 5/32 - 2.28 -042 5/16 x 3/16 - 2.31 -043 5/16 x 1/4 - 2.31 -052 3/8 x 3/16 - 2.83 -053 3/8 x 1/4 - 2.85 7.37054 3/8 x 5/16 - 2.90 -062 1/2 x 5/16 - 3.74 -065 1/2 x 3/8 3.65 3.86 -030.140.120 Speedfit Acetal 030.140.150 True-Seal Acetal030.140.130 Speedfit Polypro 030.140.160 True-Seal Polypro030.140.140 True-Seal PVDFSMALL TUBING CUTTERFEATURES• Small size.• Spring loaded, automatically closes.• Standard color, black.• Replaceable hardened steel blades.ORDER INFORMATION:1200.600 SMALL TUBE CUTTER $15.901200.601 REPLACEMENT BLADE 5.26APPLICATIONS• Good for semi-rigid tubing, such as polyethylene,polypro, and nylon, O.D. size 1/8-1/2”.SUBSTITUTE ITEMS• Plastic tubing cutters, pages 48, 56 and 105.080.130.12090