27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

LABWASTE CPVC CORROSIVEWASTE DRAINAGE SYSTEMSpears Labwaste CPVC corrosive waste drainage system.CHEMICAL & CORROSION RESISTANT CPVCOne of the key advantages of the LabWaste CPVC Systemis its excellent resistance to a broad range of corrosive environments.CPVC is inert to most mineral acids, bases, saltsand aliphatic hydrocarbons, and compares favorably to othernon-metals in these chemical environments.GENERAL CHEMICAL RESISTANCE OVERVIEW• Weak acidsExcellent• Strong acidsExcellent• Weak basesExcellent• Strong basesExcellent• SaltsExcellent• Aliphatic solutions Good• HalogensGood-Fair• Strong Oxidants Good-Fair3669.(Size No.) LABWASTE PIPE, 10’ LengthsSize No. Size (in.)Price perFoot015 1-1/2 $6.10020 2 8.24030 3 14.91040 4 21.16197.170.110 AllORDER INFORMATION:3029.030 SOLVENT CEMENT FOR LABWASTE CPVCCORROSIVE WASTE DRAINAGE SYSTEM, Quart$39.33175.110.140 AllFEATURES• All CPVC construction in full assortment of standard DWVpattern fittings.• Complete system of pipe, fittings and adapters.• Specially formulated one-step solvent cement provideschemical resistance equal to system pipe and fittings.• ULC flame and smoke rated components.• Spears LabWaste system components have beencharacteristics of flame spread and smoke density byUnderwriters Laboratories of Canada under standard testmethod CAN 102.2-M88. Suitable for air plenum installations(check local codes).• Full assortment of drainage pattern fitting configurations.LabWaste CPVC fittings are produced in ASTM D 3311and other drainage patterns required in corrosive wastesystem installations. Standard configurations are availablein nominal sizes of 1-1/2” through 4” with many specialtyfittings produced through 12”.• Cost saving solvent weld joining eliminates troublesomeelectro-fusion and mechanical connections. A provenjoining method reliably used for over 50 years, solventcement welding requires no special tools, no costly fusionequipment, and provides a solid, chemically bonded jointfor easy installation, repairs or alterations. Most importantly,solvent cement joints end problems typical of Polypropylenesystem installation, such as mechanical connector pullout,maintenance on elastomer sealed joints, internal fusion wirecorrosion, and cumbersome fusion joining methods. Savestime, cost, and worry.SPECIFICATIONS• Spears CPVC LabWaste system is a specially designedproduct line for which there is no designated ASTM StandardSpecification of conformance. However, certain portionsof existing ASTM Standards are used in its design andmanufacture as specified below.• Material: CPVC (ASTM D 1784, Cell Classification 23447).• Pipe dimensions: ASTM F441, Schedule 40.• Pipe hydrostatic burst: ASTM D 2665.• Pipe flattening: ASTM F441.• Fittings dimensions: ASTM D 2665 (fitting socket dimensionsrun slightly smaller than standard DWV for improvedinterference fit).• Fittings hydrostatic burst: ASTM D 2665.• Fittings load deflection: ASTM D 2665.• Fittings standard patterns: ASTM D 3311; other patterns toSpears specifications.• Fittings threads (accessory fittings): ASTM F 1498.• Fittings flange bold pattern (accessory fittings): ANSI B16.5,Class 150.• Solvent cement: CPVC, primerless type “one-step”, specialformulation for corrosive applications (“one-step” solventcement requires no primer application; chemical formulationdeveloped specifically for caustic solutions such as sodiumhypochlorite and sodium hydroxide that can have adverseeffect on standard CPVC cements): ASTM F 493.• Fire resistance: Flammability - V0, UL94; Flame spread - 5,CAN 102.2-M88; Smoke density - 25, CAN 102.2-M88.1-800-848-1141www.rhfs.com189