27th Edition RHFS Product Guide - Ryan Herco Flow Solutions

Ryan Herco Logo-4 Color ProcessElement: Placed Monotone EPSF o nt: Univers BlackMedium: Max size 21”X3.9”C=87, M=13, Y=2, K=1C=0, M=0, Y=0, K=72PLAST-O-MATICautomatic venting valvesSeries ARV air release valves.FEATURES• Air occurs naturally in liquid piping systems; even in small amounts, air can damagepumps, instruments and compromise systems purity and performance.• Designed to expel unwanted air from pipelines at system startup. It is also idealfor venting air from a tank or vessel during filling. For continuously venting traceamounts of gas as it occurs, see Series DGV below.• Plast-O-Matic Series ARV features a unique self-guided poppet that provides morereliable sealing than traditional ball-type designs. The valve is normally-open to allowair to vent. It closes as liquid rises and seals bubble-tight under liquid pressure of10 PSI.• Metal-free design makes it ideal for ultra high purity or corrosive liquids.• Maximum flow rate 8 scfm (60gpm).• Valve are constructed of PVC orCPVC; seals are FKM (Viton) orEPDM.• Rated for 150 psi at 75°F. Valvemust be installed vertically,upright and preferably at thehigh point of the system.ORDER INFORMATION:5383.0(Size No.) PVC/EPDM Seals5383.1(Size No.) PVC/Viton Seals5384.0(Size No.) CPVC/EPDM Seals5384.1(Size No.) CPVC/Viton Seals820.160.130 PVC820.160.140 CPVC5383.0 5383.1 5384.0 5384.1PVC/EPDM PVC/Viton CPVC/EPDM CPVC/VitonSize No. Pipe Size (NPT) Body Diameter (in.) Body Length (in.)05 1/2” 2-7/8” 4-3/4” $176.00 $181.00 $195.00 $199.0007 3/4” 2-7/8” 4-3/4” 176.00 181.00 195.00 199.0010 1” 2-7/8” 4-3/4” 176.00 181.00 195.00 199.00PLAST-O-MATIC DEGASSINGVALVESFEATURES• Series DGV vents trace amounts of gas as it occurs. A patent-pending float/actuatinglever allows the vent orifice to open when gas is present. After the gas isexpelled, liquid will force the vent closed. Whenever gas accumulates, the valve willre-open until the gas is vented.• All-plastic construction suitable for sodium hypochlorite, ozone systems, or any liquidsprone to outgassing.• Designed for systems and processes that continuously generate trace amounts ofgases. For system start-up requiring rapid venting of large amounts of air, see SeriesARV above.• Connection size is 1/2” NPT.• Valves are constructed of PVC, CPVC, Natural Polypropylene or PVDF; all withnatural Polypro float (solid block design - not hollow). Seals are FKM (Viton) orEPDM. Maximum operating pressure 100 psi at 75°F.Series DGV degassing valves.300.120.300 AllORDER INFORMATION:Part No. Body/Seal Material ConnectionPriceEach5393.005 PVC/EPDM Seals 1/2” $285.005393.105 PVC/Viton Seals 1/2” 285.005394.005 CPVC/EPDM Seals 1/2” 337.005394.105 CPVC/Viton Seals 1/2” 337.005396.005 PPro/EPDM Seals 1/2” 337.005396.105 PPro/Viton Seals 1/2” 337.005397.005 PVDF/EPDM Seals 1/2” 670.005397.105 PVDF/Viton Seals 1/2” 670.00276