BANGLADESH POWER DEVELOPMENT BOARD TENDER ... - BPDB

Static tests of all automatic sequences.(2) Running testsThe assembled crane shall be load tested including overload test with a load equalto 125% full lifting capacity after erection by the Contractor and all tests shall bein accordance with the relevant IEC Standard.The Engineer and the Board shall witness these tests.The Contractor shall supply all equipment including weights for the above tests.The Contractor shall also be responsible for the disposal of the materials used forthe test load.15.2 Hydraulic Mobile Crane15.2.1 GENEELALThe Contractor shall provide the following mobile cranes which will be utilised forerection works and for maintenance works after Taking over of the Plant. Capacitywill be 30 ton.15.2.2 TYPE AND RATING15.3 TOOLS15.3.1 GENERALThe crane shall have following features at the minimum.a. Maximum lifting capacity : not less than 30 tonb. Basic boom length : approx. 12 mc. Maximum boom length : not less than 45 md. Wire speed for lifting : max. Approx. 50 m/mine. Wire speed for boom : max. Approx. 40 m/minf. Crane turning speed : max 5 rpmg. Type of carrier : Diesel engine driven truck typewith Rubber tires. Dimension of thecrane including basic boom shall bewithin the road limit in Bangladesh.Crawler type carrier shall not be accepted.h. Maximum running speed : not less than 40 km/hrI. Climbing capacity (tan 0) : not less than 0.30J. Minimum rotating radius : not exceed 12 mk. Type of outer rigger : Hydraulicl. Safety apparatus : Over load limiter, safety interlocks,etc. shall be providedThe following tools and equipment shall be supplied under this Contract and theTenderer is required to give a full list with details in the Schedule of Tools andAppliances when submitting his Tender.Ghorasal 200 MW to 300 MW Gas Turbine Peaking Power Plant Project (Vol-2 of 3)136