BANGLADESH POWER DEVELOPMENT BOARD TENDER ... - BPDB

. Wooden doorsPlywood for panelThicknessSizeother sizes as shown on theapproved drawing: more than 5 mm thick: 40 mm: 0.9x2.0 m or other sized asshown on the approveddrawingHollow flush door shall be painted 2 coats of rust resistant paint and finish coat.Hollow flush door shall be of the waterproof type.c. Aluminium window : 70mmThickness: AlumiteFinishing: double window 0.9 x 1.8 m eSizesingle window 0.9 x 0.9 m or othersizes as per approveddrawingGlass (tinted): 6mmdAluminium swing doorsFrame and stile plateThicknessSize: More than 2.3 mm thick: More than 45 mm: As directed by the Board.All other type of doors, windows, which are not specifically mentioned, shall beprovided to the satisfaction of the Board.18.5.7 Glazing Works(1) MaterialsSheet glass shall be of good quality, free flow unevenness and strain of bubbles.All the glass used on the ground floor shall be tinted glass (salon-radiationabsorbing glass), and all the glass used on the first floor shall be clear glass.Where so required figured glass shall be used. Minimum thickness of tinted glassand clear glass shall be 6 mm. Glazing beads, sealant, putty, clips and settingblock shall be of good quality and those recommended by the glass manufacturer.All the glass used in the following rooms shall be tinted wire glass.Auxiliary room and cable spreading room Warehouse and workshops Stores(2) All glass shall be installed tightly in accordance with the instructions of theglass manufacturer.Upon completion of the works, glass shall be wiped clean and shall be inspectedby the Board.Ghorasal 200 MW to 300 MW Gas Turbine Peaking Power Plant Project (Vol-2 of 3)202