HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

Function
Category
RECALL or SAVE
lPAN FS
PSTATE
PURGE
RCLS
RCLT
SAVES
SAVET
SAVRCLF
SAVRCLN
SAVRCLW
STOR’
HNt
HNLOCKt
HNUNLKt
LSPAN
PKZMOK
‘able 5-4. Functional Index (continued)
Command
Corresponding Description
Key Function
SAV LOCK ON OFF Protects all of the spectrum analyzer’s
user state and trace registers from bein]
changed.
DELETE FILE Deletes the specified file from the
current mass storage device.
INTERUAL -> STATE Recalls spectrum analyzer state data
from one of the nine state registers in
spectrum analyzer memory.
The softkeys accessed by Recalls previously saved trace data,
Tnternal -> Trace amplitude factors, or limit-line data
from the trace registers in spectrum
analyzer memory.
STATE -> INTRUL Saves the currently displayed
instrument state ln spectrum analyzer
memory.
The softkeys accessed by Saves the selected trace data and state
Trace -> Intrnl information, amplitude correction
factors, or limit-line tables in spectrum
analyzer memory.
~or~RECALL] Specifies either a save or recall
operation.
Specifies the number to append to the
prefix for a save or recall operation, am
initiates the transfer of data.
Specilles the data to be transferred.
STATE -> CARD *, Stores data on a RAM card.
Trace -> Card*,
ALL DLP -> CARD *
FULL SPAN Sets the frequency span of the spectrun
analyzer to full span.
Returns the harmonic number of the
current harmonic band in which the
spectrum analyzer is tuning.
Band selection accessed by Forces the spectrum analyzer to use
Band Luck t or
only the selected harmonic band.
BKD LOCK OR UFFt
BND LOCK OR OFF (OFF is Unlocks the harmonic band.
underlined)+
LAST SPAN Changes the spectrum analyzer’s span tc
the previous span setting.
Returns a “0” if the peak zoom routine
(PKZOOM) found only the spectrum
analyzer’s local oscillator feedthrough,
otherwise a “1” is returned.
PKZOOM PEAK Z#DA Automatically tunes the spectrum
analyzer to the signal with the highest
amplitude level while narrowing the
frequency span to the specified
frequency span.
Option 003 required for HP 8590L or HP 8592L.
For HP 8592L, HP 85933, HP 85953, or HP 85963 only.
Programming Commands 5-23