HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

TB
Transfer B
Transfers trace B amplitude values from the spectrum analyzer to the controller.
Syntax
Related Commands: MDS, TA, TDF.
Example
DIM A(4011
OUTPUT 718;"IP;"
OUTPUT 718;"SNGLS;CF 300MHZ;SP 2MHZ;TS;"
OUTPUT 718;"TDF P;TB;"
FOR N = 1 TO 401
ENTER 718;A(N)
NEXT N
FOR N = 1 TO 401
PRINT A(N)
NEXT N
Description
The operation of TB is similar to the operation of TA.
TB Transfer B
&serves memory area for array.
Initializes analyz4x
Activates single-sweep mode, changes center
frequency and span, takes sweep.
Changes trace data format, outputs trace
B
FOR NEXT loop m.oves each element of
trace A to the computer:
FOR NEXT loop moves the trace values
from the computer to the printer:
Prints out the results.
See Chapter 3, “Different Formats for Trace Data Transfers, n for more information about
transferring trace data.
Programming Commands 5-543