HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

Function
Category
3WEEP (continued)
GDRVSWP*
3YNCHRONIZATION DONE
ltdble 5-4. Functional Index (continued)
Corresponding
Key Function
T WINDOW SNP TINE*
GDRVUTIL* GATE UTILYTY *
3DRVVBW * CPL VBW ON DFF *
3L*
3P*
ST
l-S
GATE LENGTH *
EDGE POL POS NEG *
SWP TIMB AUTO HAN
rRACE AMB A- B -> A ON OFF
Option 105 required.
AMBPL NUFtNLI2E ON OFF
4XB
BLANK
BML
BTC
BXC
ZLRW
DET
:B
MERGE
A B
BLANK A, BLANK B ,
BLANK C
B- DL -> B
6 -> &
6 c
CLEAR WFIITE A,
CLEAR WRITE B ,
CLEAR NRTTE C
DETECTOR PK SP HEG or
DETECTOR SItI’ PK
MINH NTN NOLD c
MOV
MXMH HAX HOLD A, NAX ROLD 3
‘KPOS
Description
Specifies the sweep time for the time
domain window of the gate utility.
Turns on or off the gate utility.
Couples or uncouples the video
bandwidth to the gate length.
Sets the length of time the gate is open.
Sets the polarity (positive or negative)
for the gate trigger.
Specifies the time in which the spectrun
analyzer sweeps the displayed
frequency range.
Allows you to determine when the
spectrum analyzer has started to
execute all commands prior to and
including DONE.
Starts and completes one full sweep
before the next command is executed.
Subtracts trace B from trace A and
sends the result to trace A during every
sweep of the spectrum analyzer.
Subtracts trace B from trace A, adds thr
display line value to the difference, and
sends the result to trace A during every
sweep of the spectrum analyzer.
Exchanges trace A and trace B.
Blanks trace A, trace B, or trace C and
stops taking new data into the specified
trace.
Subtracts display line from trace B and
places the result in trace B.
Transfers trace B into trace C.
Exchanges trace B and trace C.
Clears the specified trace and enables
trace data acquisition.
Selects the spectrum analyzer detection
mode.
Provides a method for putting values
into trace B.
Merges the source trace into the
specified area of the destination trace.
Updates trace C elements with minimum
level detected.
Copies the source values into the
destination.
Updates trace elements with maximum
level detected.
Returns a value, which is the index of
the maximum value in trace A, trace B,
trace C, or user-defined trace.
Programming Commands 5-25