HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

LIMILO
Lower Limit
Allows you to specify a fixed trace as the lower limit line.
Syntax
Related Commands: IF’, LIMIDEL, LIMIFAIL, LIMISEG, LIMITEST, SENTER.
Example
LIMILO Lower Limit
XLIMILO
10 OUTPUT 718;"TRDEF M,ASK,401;" D$ke.s a trace called ‘M_ASK. ”
20 OUTPUT 718;"MOV M~ASK[1,100],1000;" Moves mlues into sections of the M-ASK
trace.
30 OUTPUT 718;"MOV M~ASK[101,200],2000;"
40 OUTPUT 718;"MOV M,ASK[201,300],3000;"
50 OUTPUT 718;"MOV M~ASK[301,401],4000;"
60 OUTPUT 718;"LIMILO M-ASK;" Specifies M-ASK as the lower limit
70 OUTPUT 718;"LIMITEST ON;"
80 OUTPUT 718;"LIMIFAIL?;"
90 ENTER 718;A
100 DISP A
110 END
Description
line.
Turns on limit-line testing.
7bst.s if trace A fails limit-line testing.
Displays result of limit-line testing.
Unlike specifying a limit line with LIMISEG, LIMISEGT, SENTERT, or SENTER, the limit line
specified with LIMILO is not updated if the center frequency, frequency span, sweep time, or
reference level is changed.
Note Executing IP, LIMIDEL, LIMISEG, LIMISEGT, SENTERT, or SENTER will delete
the limit line specified with LIMILO or LIMIHI. Executing LIMILO or LIMIHI
will delete the limit line specified with LIMISEG or SENTER.
Use LIMITEST ON to display the limit line trace specified by LIMILO. Use LIMITEST OFF to
blank the limit line trace specified by LIMILO.
Programming Commands 5-279