HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

KEYLESL Key Label
40 OUTPUT 718;"@;"
50 OUTPUT 718;"KEYDEF l,D-LP,%SHOW CAL%;"
60 OUTPUT 718;"KEYEXC 1;"
70 OUTPUT 718;"KEYLBL l,%NEW NAME%;"
80 END
Description
The “@” signifies the end of the function
declaration.
Soflkey 1 is now called “‘SHOW CAL” and
performs the function D-L2
Executes sojtkey 1.
Soflkey 1 is now labeled “NEW NAME”,
but performs the same function.
When specifying the softkey number, you should only use a number from 1 through 6, or 601
through 1200. Using other than the recommended softkey numbers can cause undesirable
results.
The softkey number corresponds to the menu number as follows:
softkey number = (menu number - 1) x 6 + softkey position
(The softkey position range is 1 through 6.)
For example:
Menu 1 contains softkey numbers 1 through 6
Menu 101 contains softkey numbers 601 to 606
Menu 200 contains softkey numbers 1195 to 1200
Menu 1 can be accessed by pressing (MEAS/USEji), User hanus . Menus 101 through 200, as well
as menu 1, can be accessed using the MENU command. See “MENU” for more information on
accessing softkeys and menus.
5-262 Programming Commands