HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

LIMIHI
Upper Limit
Allows you to specify a fixed trace as the upper limit line.
Syntax
LIMIHI
h u s e r - d e f i n e d t r a c e /
/
LIMIHI Upper Limit
Related Commands: IP, LIMIDEL, LIMIFAIL, LIMILO, LIMISEG, LIMITEST, SENTER.
Example
10 OUTPUT 718;"TRDEF M,ASK,401;”
20 OUTPUT 718;"MOV M,ASKC1,1001,1000;"
30 OUTPUT 718;"MOV M~ASK[101,2001,2000;"
40 OUTPUT 718;"MOV M~ASK[201,300],3000;"
50 OUTPUT 718;"MOV M,ASK[301,401] ,400O;”
60 OUTPUT 718;"LIMIHI M-ASK;"
70 OUTPUT 718;"LIMITEST ON;"
80 OUTPUT 718;"LIMIFAIL?;"
90 ENTER 718;A
100 DISP A
110 END
Description
XLlMlHl
Dejines a trace called “M-ASK. ”
Moves values into sections of the M-ASK
trace.
Spec@.es M-ASK as the upper limit
line
Turns on limit-line testing.
l&sts if trace A fails limit-line testing.
Displays result of limit-line testing.
Unlike specifying a limit line with LIMISEG, LIMISEGT, SENTER, or SENTERT, the limit line
specified with LIMIHI is not updated if the center frequency, frequency span, sweep time, or
reference level are changed.
Note Executing IP, LIMIDEL, LIMISEG, LIMISEGT, SENTER, or SENTERT will delete
the limit line specified with LIMILO or LIMIHI. Executing LIMILO or LIMIHI
will delete the limit line specified with LIMISEG, LIMISEGT, SENTER, or
SENTERT.
Use LIMITEST ON to display the limit line trace specified by LIMIHI. Use LIMITEST OFF to
blank the limit line trace specified by LIMIHI.
Programming Commands 5-275