HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

Set B%W Printer
Press this key to print in black and white, then press one of the
following keys to select the appropriate printer mode.
. Press HP B%W PRINTER if the spectrum analyzer is connected to a
Hewlett-Packard printer.
Selecting any Hewlett-Packard printer results in three printouts
per page prior to formfeeding the page.
One printout per page can be achieved by manually formfeeding
each printout.
� Press I@ B%W DJS40 if the spectrum analyzer is connected to a
Hewlett-Packard DeskJet 540 printer.
. Press EP MX8D SML LRG if the spectrum analyzer is connected to
a MX-80 Epson or other compatible g-pin print-head printer.
Pressing this key to underline SML will print two printouts to a
page and will print softkey labels if desired. See step 7
Pressing this key to underline LRG will print only one printout to a
page and will not print the softkey labels.
� Press RF LQ570 SML LRG if the spectrum analyzer is connected to
a LQ-570 Epson or other compatible 24-pin print-head printer.
Pressing this key to underline SML will print two printouts to a
page and will print softkey labels if desired. See step 7
Pressing this key to underline LRG will print only one printout to a
page and will not print the softkey labels.
6. If you want the softkey labels to be printed with the spectrum analyzer display printout,
press PRT MEMU ON OFF so that ON is underlined. Note that this function does not work
when EP MX8G SML LRG or EF LQ570 SML LRG are pressed to underline LRG.
7. Press Previous Menu, CDPY DEV PRNT PLT (PRNT should be underlined), then IcoPv].
Preparing for Use 1-21