HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

CNTLI, 5-110
CNT RES AUTO MAN softkey. See MKFCR
COMB, 5-111
comb generator control
COMB, 5-l 11
COMB GEN ON OFF softkey. See COMB
combining two traces, 5-114
COM command, 2-3
command complete, 5-522
command mnemonic, 5-2
commands, 2-2
command terminators, 5-2
commenting programming lines, 2-10
compatible commands, 5-9-10
COMPRESS, 5- 112
compress trace, 5-l 12
COMPUTE ACPGRAPH softkey. See
ACPGRAPH
compute the adjacent channel power graph,
5-42
CONCAT, 5-l 14
concatenate, 5- 114
confidence test, 5- 105
configuring your computer system, l-l
CONF TEST softkey. See CNF
connecting a modem
RS-232 operation, C-6
connecting your spectrum analyzer to a
printer or plotter, l-11
connection an HP-GL plotter (RS-232
operation), C-6
continuous sweep, 5-l 16
continuous sweep measurement, 5-37
CONTINUS FFT softkey. See FFTCONTS
CONT MEAS softkey. See ACPCONTM
controlling the marker counter, 5-338
controlling trace data with a computer, 3-2
CONTS, 5-l 16
convert to absolute units, 5-121
convert to measurement units, 5-123
copying the source to a destination
MOV, 5-370
COPY key. See PLOT, PRINT
correction factors on, 5-117
CORRECT ON OFF softkey. See CAL, CORREK
CORREK, 5-l 17
COUPLE, 5-l 18
COUPLE AC DC softkey. See COUPLE
couple resolution bandwidth to pulse width,
5-202
couple sweep time to pulse repetition interval,
5-206
couple video bandwidth to gate length, 5-215
CPL RBW ON OFF softkey. See GDRVRBW
CPL SWP ON OFF softkey. See GDRVST
CPL VBW ON OFF softkey. See GDRVVBW
CR, 5-9
create a DLP with the DLP editor, 4-17
creating a DLP, 4-2
creating a modular DLP, 4-7
creating a trace window, 5-578
creating a user-defined trace, 5-562
creating a user-defined variable, 5-583
CRT HORZ POSITION softkey. See CRTHPOS
CRTHPOS, 5-l 19
CRT VERT POSITION softkey. See CRTVPOS
CRTVPOS, 5-120
cs, 5-9
CT, 5-9
CTA, 5-121
CTM, 5-123
CTS
RS-232 handshaking line, C-l
current units, 5-4
cv, 5-9
D
DA, 5-124
data byte, 5-3
data byte & EOI, 5-3
data carrier detect
RS-232 handshaking line, C-2
data entry
disabling, 5-228
data lines
RS-232, C-l
data terminal ready
RS-232 handshaking line, C-2
date mode, 5-127
DATEMODE, 5-127
DATEMODE MDY DMY softkey. See
DATEMODE
DCD
RS-232 handshaking line, C-2
DEFAULT CAL DATA softkey. See CAL
DEFAULT SYNC softkey. See SYNCMODE
define function, 5-184
define terminator, 5-145
delay sweep for time window, 5-209
DELETE FILE softkey. See DISPOSE, PURGE
delete limit-line table, 5-269
deleting a DLP from analyzer memory, 4-14
deleting a file from a RAM card, 5-453
deleting on event commands, 5-132
deleting softkeys, 5-132
delimiter, 5-3
delta
marker type, 5-364
DEMOD, 5-128
DEMOD ON OFF softkey. See DEMOD
Index-3