HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

MIN Minimum
Example
10 OUTPUT 718;"IP;"
20 OUTPUT 718*"SNGLS*"
30 OUTPUT 718;"VARDEi M,INIMUM,O;"
40 OUTPUT 718;"TS;MKPK HI;";
50 OUTPUT 718;"MIN M-INIMUM,MKA,-20;";
60 OUTPUT 718;"M,INIMUM?;"
70 ENTER 718;Number
80 DISP Number
90 END
Description
Initializes spectrum analyzer:
Activates the single-sweep mode.
&y%.es vam’able with an initial value of 0.
Sweeps trace A and places the marker at the
highest peak.
Compares the marker amplitude to -20 dBm.
Stores the lesser of the two in MINIMUM.
Returns the result to the computer:
Puts the result in the computer variable,
Number:
LXsplays the result.
If one of the sources is a single value, it acts as a threshold, and all values equal to or less than
the threshold pass to the destination. The values larger than the threshold are replaced by the
threshold value in the destination.
When the source is longer than the destination, the source is truncated to fit. When the source
is shorter than the destination, the last element is repeated to fill the destination.
5-320 Programming Commands