HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

6. With PLTS/PG 1 2 4 , you can choose a full-page, half-page, or quarter-page plot. Press
PLTS/PC 1 2 4 to underline the number of plots per page desired.
7. If two or four plots per page are chosen, a function is displayed that allows you to select
the location on the paper for the plotter output. If two plots per page are selected, then
PLT Cl PLT [I _
Lac _ _ function is displayed. If four plots per page are selected, then LOC _ _ is
displayed. Press the softkey until the rectangular marker is in the desired section of the
softkey label. The upper and lower sections of the softkey label graphically represent where
on the page the plotter output will be located.
Note For a multi-pen plotter, the pens of the plotter draw the different components
of the screen as follows:
Pen Description
Number
1 Draws the annotation and graticule.
2 Draws trace A.
3 Draws trace B.
4 Draws trace C and the display line.
5 Draws user-generated graphics and the lower-limit line.
6 Draws the upper-limit line.
8. Press Previous Menu, COPY PINT PLT (PLT should be underlined), then Icopvl.
Note Once the address of the printer and plotter have been entered, the spectrum
There is no need to reenter them when the spectrum analyzer is turned off and
on.
Preparing for Use l-15