HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

LIMIFAIL
Limits Failed
Returns a “0” ifthelastmeasurementsweep of trace AisequaIto or within the limit-line
bounds.
Syntax
Pre’def ined
function path only
Related Commands: LIMIHI, LIMILINE, LIMILO, LIMISEG, LIMISEGT, LIMITEST, SENTER,
SENTERT.
Example
10 OUTPUT 718;“IP;SNGLS;CF300MHZ;SPlOOMHZ;”
20 OUTPUT 718;“LIMIDEL;”
30 OUTPUT 718;“LIMIMODE UPPER;”
40 OUTPUT 718;“LIMISEG 250MHZ,-60DB,FLAT;”
50
60
70
80
90
100
110
120
130
140
Initializes spectrum analyzer and
changes the frequency and span
settings.
Deletes any limit-line tables, sets
the table type to $xed.
Spec@es the upper limit-line table.
Creates an entry for the upper
limit-line table. Because the LIMISEG
command is used, the limit-line
will be boxed on the frequency.
OUTPUT 718;“LIMISEG 290MHZ,-60DB,SLOPE;”
OUTPUT 718;"LIMISEG 295MHZ,-lSDB,FLAT;"
OUTPUT 718;"LIMISEG 305MHZ,-15DB,SLOPE;"
OUTPUT 718;"LIMISEG 3lOMHZ,-GODB,FLAT;"
OUTPUT 718;"LIMISEG SlOMHZ,-GODB,FLAT;"
OUTPUT 718;"LIMITEST 0N;TS;" Turns on limit-line testing.
OUTPUT 718;"LIMIFAIL?;" Returns the status of the limit-line
testing.
ENTER 718;A
DISP A Displays the result.
END
5.272 Programming Commands