HP 8590 E & L Series Spectrum Analyzers and HP 8591C Cable TV ...

MENU Menu
Description
When using the KEYDEF, KEYENH, or KEYCMD commands, you need to specify the softkey
number. The softkey number corresponds to the menu number as follows:
softkey number = (menu number - 1) x 6 + softkey position
(The softkey position range is 1 through 6.)
For example:
Menu 1 contains softkey numbers 1 through 6
Menu 101 contains softkey numbers 601 to 606
Menu 200 contains softkey numbers 1195 to 1200
Menu 1 can be accessed by pressing C-J, User IIenus . Menus 101 through 200, as well
as menu 1, can be accessed using the MENU command. The MENU command is a useful way
to “link” softkey menus together. For example, example 2 shows how menu 1 (with softkeys
1 through 6) can be used to access menu 102 (with softkeys 607 and 608). Menu 1 can be
v I
accessed by pressing c-1, User Minus .
Sof tkeys
1 through 6
MENU 1 MENU 102
F IND DELTA
RESUME SWEEP
MORE SETUPS --+
-
FM DEMOD
\
AM DEMOD \
/
/
/
Figure 5-7. Using the MENU Command
Sof tkeys
607 through 612
The menu numbers 1 and 101 through 200 are the recommended menus available for the user
to use.
Executing “MENU 0;” clears the softkey menu from the spectrum analyzer screen.
Query Response
5-314 Programming Commands
cull8e