Table of Contents - Covidien

Results of
ventilator
breathing
system
testing
(using
circuits
identified
for use with
700 Series
Ventilators)
Table C-5: Technical specifications (continued)
Specifications
NOTE:
To achieve compliance with the more rigid
requirements for oxygen monitoring (as set forth
in ISO 7767), Covidien recommends using an
external monitor that meets that standard.
Internal volume: Not applicable; 700 Series Ventilators
automatically adjust for volume losses due to gas
compressibility (that is, automatic compliance
compensation), subject to a maximum delivered
volume of 2.5 L.
NOTE:
To ensure that compliance compensation
functions correctly, the user must run SST with
the circuit configured as intended for use on
the patient.
NOTE:
Ventilator breathing circuit testing specifications
are based on the recommended configurations
shown in Figure C-1 (heated wire humidifier
without water traps and non-heated wire
humidifier with water traps).
700 Series Ventilator Operator’s Manual 10066984 Rev. D C-9