Gas Turbine Handbook : Principles and Practices

Appendix D 399
“Standards For Advanced Ceramics And Pre-Standardization Research—A
Review,” Roger Morrell. ASME 96-GT-320.
COMBUSTION
“Development Of An Innovative High-Temperature Gas Turbine Fuel
Nozzel,” G.D. Myers; J.P. Armstrong; C.D. White; S. Clouser; R.J.
Harvey. ASME 91-GT-036.
“Evaluation Of A Catalytic Combustor In A Gas Turbine-Generator
Unit,” S. Kajita; T. Tanaka; J. Kitajima. ASME 90-GT-089.
“Second Generation Low-Emission Combustors For ABB Gas Turbines:
Burner Development And Tests At Atmospheric Pressure,” Th.
Sattelmayer; M.P. Felchlin; J. Hausmann; J. Hellat; D. Styner. ASME
90-GT-162.
“A Simple And Reliable Combustion System,” B. Becker; F. Bonsen;
G. Simon. ASME 90-GT-173.
“Catalytically Supported Combustion For Gas Turbines,” Viktor
Scherer; Timothy Griffin. ASME 94-JPGC-GT-1.
“Reliability Analysis Of A Structural Ceramic Combustion Chamber,”
J.A. Salem; J.M. Manderscheid; M.R. Freedman; J.P. Gyekenyesi.
ASME 91-GT-155.
“Low NO x
Burner Design Achieves Near SCR Levels,” Jerry Lang,
Industrial Power Conference 1994.
“Development of a Small Low NOx Combustor with a Staging System
For an Aircraft Engine (Part 1),” Masayoshi Kobayashi, Masahi Arai,
Toshiyuki Kuyama. ASME 96-GT-043
“Development of A Dry Low NOx Combustor for 2MW Class Gas Turbine,”
J. Hosoi, T. Watanabe, H. Tob. ASME 96-GT-053