Gas Turbine Handbook : Principles and Practices

416 Gas Turbine Handbook: Principles and Practices
“Water Spray Injection of an Axial Flow Compressor,” I.T. Wetzel and
B.H. Jennings, Mid-West Power Conference, April 18 - 20, 1949.
“Technical Performance of an Axial-Flow Compressor in a Gas-Turbine
Engine Operating with Inlet Water Injection,” Reece V. Hensley,
Technical Note 2673, March 1962, National Advisory Committee For
Aeronautics.
“Effect of Water Spraying on Operation of the Compressor of a Gas
turbine Engine,” L.I. Slobodyanyuk, Energeticka, No. 1; 1973.
“Gas Turbines with Heat Exchanger and Water Injection in the Compressed
Air,” Gasparovic and Hellemans; Combustion, Dec 1972.
“Axial-Compressor Flow Distortion with Water Injection”; Tsuchiya,
et al.; AIAA paper No AIAA-83-0004; 1983.
“Direct and System Effects of Water Injection into Jet Engine Compressors’’;
Murthy, et al.; Presented at AIAA/ASME 4th Joint Fluid
Mechanics, Plasma Dynamics and Laser Conference, Mat 12-14,
1896.
‘’Water Injection into Axial Flow Compressors," Technical ReportA-
FAPL-TR-7677; Aug 1976.
‘’Value of Wet Compression in Gas-Turbine Cycles’’; R. Kleinschmidt;
Mechanical Engineer, vol. 69, No. 2; pp.115-116, ASME 1946.
"Benefits of Compressor Inlet Air Cooling for Gas Turbine Cogeneration
Plants, Delucia et al., ASME Paper No. 95-GT-311, 1995.
“The Theory and Operation of Evaporative Coolers for Industrial Gas
Turbine Installations; R. Johnson, Sr., pp. 327-334, Journal for Engineering
for Gas Turbines and Power, vol. 111; April 1989.
“Field Evaluation Of On-Line Compressor Cleaning In Heavy Duty
Industrial Gas Turbines,” G.L. Haub; W.E. Hauhe, Jr. ASME 90-GT-
107.