Gas Turbine Handbook : Principles and Practices

Appendix D 415
“Film Cooling On A Gas Turbine Rotor Blade,” K. Takeishi; S. Aoki;
T. Sato; K. Taukagoshi. ASME 91-GT-279.
“Full Coverage Discrete Hold Film Cooling: The Influence Of The
Number Of Holes And Pressure Loss,” G.E. Andrews; A.A. Asere;
M.L. Gupta; M.C. Mkpadi; A. Tirmahi. ASME 90-GT-061.
“Film Cooling Effectiveness Downstream Of Single Row Of Holes
With Variable Density Ratio,” A.K. Sinha; D.J. Bogard; M.E. Crawford.
ASME 90-GT-043.
“Gas Turbine Film Cooling: Flowfield Due To A Second Row Of Holes,”
A.K. Sinha; D.G. Bogard; M.E. Crawford. ASME 90-GT-044.
“Prediction And Measurement Of Film Cooling Effectiveness For
A First-Stage Turbine Vane Shroud,” D. Granser; T. Schulenberg.
ASME 90-GT-095.
“Discharge Coefficient Of Turbine Cooling Holes: A Review,” N. Hay;
D. Lampard. ASME 96-GT-492.
“Adiabatic Effectiveness And Heat Transfer Coefficient On A Film-
Cooled Rotating Blade,”Vijay K. Garg . ASME 96-GT-221.
“Effects Of Surface Roughness On Film Cooling,” Donald L. Schmidt;
Basav Sen; David G. Bogard. ASME 96-GT-299.
“Effects Of Geometry On Slot-Jet Film Cooling Performance,” Daniel
G. Hyams; Kevin T. McGovern; James H. Leylek. ASME 96-GT-187.
“An Experimental Study Of Turbine Vane Heat Transfer With Water-
Air Cooling,” Nirm V. Nirmalan; John A. Weaver; Larry D. Hylton.
ASME 96-GT-381.
“Analysis And Validation Of Turbine Disc Cooling,” John M. Hannis;
John D. Maltson; Robert J. Corry, Nigel Johnson. ASME 96-GT-097.
“Aerodynamic and Thermodynamic Effects of Coolant Injection on
Axial Compressors,” P.G. Hill, November 1963.