Gas Turbine Handbook : Principles and Practices

424 Gas Turbine Handbook: Principles and Practices
“A Fast-Response Total Temperature Probe For Unsteady Compressible
Flows,” D.R. Buttsworth; T.V. Jones. ASME 96-GT-350.
“Hot Wire Measurements During Rotating Stall In A Variable Pitch
Axial Flow Fan,” Eduardo Blanco-Marigorta; Rafael Ballesteros-Tajadura;
Carlos Santolaria. ASME 96-GT-441.
“A High-Frequency-Response Pressure Probe For The Measurement
Of Unsteady Flow Between Two Rotors In A Hydrodynamic Turbomachine,”
C. Achtelik; J. Eikelmann. ASME 96-GT-412.
“Laser Vibrometry Measurements Of Rotating Blade Vibrations,”
Andrew K. Reinhardt; J.R. Kadambi; Roger D. Quinn. ASME Cogen
Turbo Power ’94.
“Improved Method For Flame Detection In Combustion Turbines,”
Richard J. Roby; Andrew J. Hamer; Erik L. Johnsson; Shawn A. Tilstra.
ASME Cogen Turbo Power ’94.
“Application Of Analytical Redundancy To The Detection Of Sensor
Faults On A Turbofan Engine,” Ronald E. Kelly. ASME 96-GT-003.
“Simple Instrumentation Rake Designs For Gas Turbine Engine Testing,”
Peter D. Smout; Steven C. Cook. ASME 96-GT-032.
“5,000-Hour Stability Tests Of Metal Sheathed Thermocouples At
Respective Temperatures Of 538 C and 675 C,” T.P. Wang; A. Wells;
D. Bediones. ASME 91-GT-182.
FIRE PROTECTION
“Experience With External Fires In Gas Turbine Installations And
Implications For Fire Protection,” R.E. Dundas. ASME 90-GT-375.
ADDITIONAL ARTICLES
“Micro, Industrial, and Advanced Gas Turbines Employing Recuperators,”
# GT2003-38938, by Steven I. Freedman, Jim Kesseli, Jim
Nash, Tom Wolf