Earthquake Engineering Research - HKU Libraries - The University ...

The development of CAST has been supported by a grant from the University of Illinois, a
fellowship from Portland Cement Association, and a CAREER award from the National Science
Foundation.
REFERENCES
American Association of State Highway and Transportation Officials (1994). AASHTO LRFD
bridge specification. 1st ed., American Association of State Highway and Transportation Officials
Washington, DC.
American Concrete Institute Committee 318 (ACI 318) (2002). Building code requirements for
structural concrete (ACI 318-02) and commentary (ACI 318R-02), American Concrete Institute,
Farmington Hills, MI.
Comite Euro-International du Beton (1993). CEB-FIP model code 1990, Thomas Telford Services,
Ltd., London.
CSA Committee A23.3 (1984). Design of concrete structures for buildings (CAN3-A23.3-M84),
Canadian Standards Association, Rexdale, Canada.
FIP Commission 3 (1998). FIP recommendation 1996, practical design of structural concrete,
Federation Internationale de la Precontrainte, Lausanne, Austria.
Kinugasa, H., and Nomura, S. (1996). Failure mechanism under reversed cyclic loading after
flexural yielding (Paper No. 177). Proceeding of the llth World Conference on Earthquake
Engineering.
Kuchma, D. A., and Tjhin, T. N. (2002). Design of discontinuity regions in structural concrete using
a computer-based strut-and-tie methodology," Proceedings of the 81st TRB Annual Meeting.
Marti, P. (1985). Basic tools of reinforced concrete beam design. ACI Journal, Proceedings 82:1,
45-56.
MacGregor, 1 G. (2002). Derivation of strut-and-tie models for the 2002 ACI code. To be
published in ACI Special Publication entitled "Examples for the design of structural concrete with
strut-and-tie models."
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry
buildings, John Wiley & Sons, New York.
Priestley, M. J. N. (2000). Performance-based seismic design (Paper No. 2831). Proceeding of the
12th World Conference on Earthquake Engineering.
Schlaich, J., Schafer, K., and Jennewein, M. (1987). Toward a consistent design of structural
concrete. Journal of the Prestressed Concrete Institute 32:3, 74-150.
Sritharan, S., Priestley, M. J. N., and Seible, F. (2001). Seismic design and experimental
verification of concrete multiple column bridge bents. ACI Structural Journal 98:3, 335-346.
Stojadinovic, B. (1999). Strut-and-tie models for cyclic loading. Informal group discussion of Sub-
Committee 445-2.
Tjhin, T. N., and Kuchma, D. A. (2002). Computer-based tools for design by the strut-and-tie
method: advances and challenges. To be published in Sept.-Oct. issue of ACI Structural Journal
Vision 2000 (1995). Performance-based seismic engineering of buildings. Vision 2000 Committee,
Structural Engineers Association of California, Sacramento, CA.
330