Earthquake Engineering Research - HKU Libraries - The University ...

82
REFERENCES
Brooks T. (1999). Using smart accelerometers and wireless interfaces for condition monitoring. Machine
Plant & Systems Monitor. May/June issue.
Carlson J.D. (1994). The promise of controllable fluids. Proc. of Actuator 94 (H. Borgmann and K.
Lenz, Eds.), AXON Technologic Consult GmbH, 266-270.
Carlson J.D. and Weiss K.D. (1994), A growing attraction to magnetic fluids. Machine Design, August,
61-64.
Carlson J.D., Catanzarite D.M., and St. Clair K.A. (1995). Commercial magneto-rheological fluid devices.
Proc., 5th Int. Conf on ER Fluids, MR Fluids and Assoc. Tech., Sheffield, UK.
Carlson J.D., Chrzan M.J., and James P.O. (1995). Magnetorheological fluid devices, U.S. Patent
#5,398,917.
Carlson J.D. and Spencer Jr. B.F. (1996). Magneto-rheological fluid dampers for semi-active seismic
control. Proc, 3rd Int Conf on Motion and Vib. Control, III, 35-40.
Chen, Y., Ni, Y.Q., and Ko, J.M. (2002). Applicability of passive and active devices for vibration control
of long-span bridge cables. Research Report, Department of Civil and Structural Engineering,
The Hong Kong Polytechnic University, Hong Kong.
Doebling A.W. and Farrar C.R. (1999). The state of the art in structural identification of constructed facilities.
Los Alamos National Laboratory.
Dyke S.J., Spencer Jr. B.F., Sain M.K., and Carlson J.D. (1998). An experimental study of MR dampers
for seismic protection. Smart Mat. and Struct. 7, 693—703
Feng M.Q. and Shinozuka M. (1990). Use of a variable damper for hybrid control of bridge response
under earthquake. Proc., U.S. National Workshop on Struct. Control Research. USC Publication no.
CE-9013.
Gavin H.P., Hanson R.D., and Filisko F.E. (1996). Electrorheological dampers, part 1: analysis and design.
J. Applied Mechanics, 63:9, 669-675.
Hill J. (2000) A software architecture supporting networked sensors. Research Project to obtain the degree
of Master of Science. University of California at Berkeley.
Hill J., Szewczyk R., Woo A., Hollar S., Culler D., and Pister, K. (2000). System architecture directions
for networked sensors. International Conference on Architectural Support for Programming Languages
and Operating Systems - ASPLOS, 9th International Conference Architectural Support for
Programming Languages and Operating Systems (ASPLOS-LX), Cambridge, MA, pp. 93-104.
Hollar S. (2000). COTS dust Research project to obtain the degree of Master of Science. University of
California at Berkeley.
Housner G.W., Bergman L.A., Caughey T.K., Chassiakos A.G, Claus R.O., Masri S.F., Skelton R.E.,
Soong T.T., Spencer B.F., and Yao J.T.P. (1997). Structural control: past, present and future," J. of
Engrg Mech , ASCE, 123(9), 897-971.
Kamagata S. and Kobori T. (1994). Autonomous adaptive control of active variable stiffness systems
for seismic ground motion", Proc., 1 st World Conf. on Struct. Control, TA4:33-42, Pasadena, CA.
Kawashima K. and Unjoh S. (1993). Variable dampers and variable stiffness for seismic control of
bridges. Proc, Int. Workshop on Struct. Control, Honolulu, Hawaii, 283-297.
Kawashima K., Unjoh S., and Shimizu K. (1992). Experiments on dynamics characteristics of variable
damper. Proc., Japan Nat. Symp. on Struct. Resp. Control, Tokyo, Japan, 121.
Kiremidjian A.S., Straser E.G, Meng T.H., Law K., and Soon, H. (1997). Structural damage monitoring
for civil structures. International Workshop - Structural Health Monitoring, pp. 371-382.
Kobori T. (1994). Future direction on research and development of seismic-response-controlled structure.
Proc. 1st World Conf on Struct. Control, Panel: 19-31.