Earthquake Engineering Research - HKU Libraries - The University ...

387
REFERENCES
Leroueil, S. (2001). Natural slopes and cuts: movement and failure mechanisms. Geotechniqu 51:3,
197-243.
Schuster, R. L. (1996). Socioeconomic significance of landslides. In Landslides: Investigation and
Mitigation, Special Report 247, Washington: Transportation Research Board, pp. 12-35.
Li, T. (1989). Landslides: extent and economic significance in China. Proc. 28th Int. Geol Cong.:
Symp. Landslides, Washington, 271-287,
Bishop, A. W. (1955). The use of the slip circle in the stability analysis of slopes. Geotechniqu 5:1, 7-
17,
Morgenstern, N. R. and Price, V. E. (1965). The analysis of stability of general slip surface.
Geotechniqu 15:1, 79-93.
Spencer, E. (1967). A method of analysis of the stability of embankments assuming parallel interslice
forces. Geotechniqu 17:1, 11-26.
Janbu, N. (1973). Slope stability computations. In Embankment dam engineering. Edited by R.C.
Hirschfield and J. Poulos. John Wiley and Sons, New York, pp. 47-86.
Sarma, S. K. (1979). Stability analysis of embankments and slopes. Journal of the Geotechnical
Engineering Division, ASCE 105:12, 1511-1524.
Hoek, E, (1987). General two-dimensional slope stability analysis. In Analytical and computational
methods in engineering rock mechanics. Edited by E.T. brown. Allen and Unwin, London, pp. 95-128.
Baker, R. (1980). Determination of the critical slip surface in slope stability computations.
International Journal of Numerical and Analytical Methods in Geomechanics 4, 333-359.
Arai K, and Tagyo K. (1985). Determination of noncircular slip surface giving the minimum factor of
safety in slope stability analysis. Soils and Foundations 25:1, 43-51.
Siegel, R. A., Kovacs, W. D., and Lovell, C. W. (1981). Random surface generation instability
analysis. Journal of the Geotechnical Engineering Division, ASCE 107:7, 996-1002.
Chen, Z.-Y. (1992). Random trials used in determining global minimum factors of safety of slopes.
Canadian Geotechnical Journal 20, 225-233.
Greco, V. R. (1996). Efficient Monte Carlo technique for locating critical slip surface. Journal of the
Geotechnical Engineering, ASCE 122:7, 517-525.
Nguyen, V. U. (1985). Determination of critical slope failure surfaces. Journal of the Geotechnical
Engineering, ASCE 111:2, 238-250.
Goh, A. T. C. (1999). Genetic algorithm search for critical slip surface in multiple-wedge stability
analysis, Canadian Geotechnical Journal 36, 382-391.