chapter viii wool & wollen textiles industry - Ministry of Textiles

annual report 2011-12
STATUS OF IMPLEMENTATION OF
SCHEMES UNDER MM-IV OF THE
JUTE TECHNOLOGY MISSION AS
ON 30 TH SEPTEMBER, 2011
PHYSICAL
Scheme 6.1 : Sustainable Human
Resource Development in Jute Mill
Sector
● Training has been imparted to
18,071 Master trainers, Supervisors,
Maintenance Workers and other
Workers in 39 jute mills.
●
●
The Master Trainers and Supervisors
have already trained a further 7620
workers in 16 mills.
Institute of Jute Technology has
developed 21 audio-visual modules
on different process of production as
training aid for sustainable training in
the jute mills.
Scheme No. 6.2 : Development of Jute
Mill Machinery
●
●
●
●
Scheme No. 6.2 of JTM takes
care of Machinery Development in
the jute industry and the status of
implementation is as follows :
Out of five, four processing machines
namely Composite Card, Drawing,
Spinning & Weaving are under
development in CJMD.
Concept testing is carried out for
carding machine.
Prototype development of 5 modern
technology machines have been
undertaken under “Centre for Jute
Machinery Development (CJMD)
and initial design and development of
“Chain-gill Finisher Drawing Frame”
is under process.
●
2 machines, viz. Rotating Spindle
Spg. Frames [Type II (8.5 – 14 lbs]
and S4 Type Loom [Weaving] –
Shuttle-less developed under the
Scheme are under the process of
commercialization.
● The proposal for development
of Electronic & Microprocessor
Based Integrated instruments
for “Development of Integrated
Equipments for Jute Grading System”
under ISMDCP was assigned to
National Institute of Research on
Jute and Allied Fibre Technology
(NIRJAFT), Kolkata.
Scheme No. 6.3 : Productivity
Improvement & TQM Facilitation
The scheme to improve productivity and
to establish Total Quality Management
(TQM) facilities in the jute industry has
been provided under Mini Mission – IV of
the JTM with NJB as facilitating agency
of the scheme. The identified areas of
operation of Productivity Improvement &
TQM Facilitation are
●
●
●
●
●
Total Quality Management,
Energy Management
Waste Management
Maintenance Management
Work Study & Ergonomics.
To facilitate these studies, NJB has
engaged 4 National level reputed
Agencies / Institutions to conduct the
studies under the scheme and implement
recommendations in selected 6 jute mills.
After completion of diagnostic studies,
corrective implementation plans have
been finalized in consultation with the
respective jute mills. Implementation of
the corrective measures has started in
the 5 Jute Mills.
77