P12x/EN T/Eb6 - Schneider - error

Technical DataP12x/EN TD/Eb6MiCOM P120/P121/P122/P123 Page 21/5010. AUTOMATION CONTROL FUNCTIONS10.1 Trip commandsAssignation of the following thresholds to trip output relay:−−all models: tI>, tI>>, tI>>>, tIe>, tIe>>,P121, P122 & P123 additional functions: t Aux 1, t Aux 2, Equ A, Equ B, Equ C, EquD, Equ E, Equ F, Equ G, Equ H,− P122 & P123 additional functions: tIe>>>>, tI < , tI2 >, tI2 >>, Thermal θ,Brkn.Cond, t Aux 3,−P123 additional functions: tIe>>>, t Aux 4, t Aux 5, SOTF, Ctrl , CB Fail.10.2 Latch functionsTrip output relay programmable with one or many thresholds:−−−−all models: tI>, tI>>, tI>>>,P121, P122 & P123 additional functions: tIe>, tIe>>, tIe>>>, tAux1 and tAux2P122 & P123 additional functions: tIe>>>>, tI , tI2 >>, Thermal θ, Brkn.Condand t Aux 3P123 additional functions: tAux 4, tAux 5, SOTF, CB Fail.10.3 Blocking logic (P122 & P123)Possibility to block the following delayed thresholds:−−−all models: tI>, tI>>, tI>>>, tIe>, tIe>>, tIe>>>,P121, P122 & P123 additional functions: tAux1 and tAux2P122 & P123 additional functions: tIe>>>>, tI2 >, tI2 >>, Thermal θ, Brkn.Cond and tAux 3,− P123 additional functions: tAux 4, tAux 5.10.4 Second Inrush blocking logic (P122 & P123)Possibility to set a second harmonic blocking threshold and to block each delayedovercurrent thresholdBlocking InrushSetting rangeMin Max StepBlocking inrushYes or NoInrush harmonic ratio 10% 35% 0.1%Inrush tReset time 0s 2s 10msThresholds: tI>, tI>>, tI>>>, tIe>, tIe>>, tIe>>>, Ie>>>>, I2> and I2>>