P12x/EN T/Eb6 - Schneider - error

P12x/EN VC/Eb6Page 10/34Hardware/Software VersionHistory and CompatibilityMiCOM P120/P121/P122/P123Relay Type P121SoftwareVersionDate ofIssueFull Description of ChangesV6.G 11/01/05 Software changes implemented in this versionPossibility to come back to the head line of the menu bypressing Clear Button.None.Software improvement done in this version06H 14/04/05 Software changes implemented in this versionWatchdog behaviour when courier protocol usedPrimary ration correction when courier protocol usedNew DNP3 address is taken in account only after a rebootof the relay.06I 19/06/06 Software changes implemented in this versionNo Px2x relay blocking after reception of a timesynchronisation frame in T103Correction of SF6 front face alarm text and Start I> eventwhen IEC103 used06J 04/08/06 Software changes implemented in this versionCorrection of trip Phase L1/L2/L3 events in IEC-103communication.07.A 16/05/08 Software changes implemented in this version- Correction of the following defects:. DMT temporisation ≥ 20s: decimal values truncated,. parameters of DNP3 and ModBus addresses,. update of the phase indication of alarm tI>,V10.D 29/08/06 v10.D software is equivalent to v6.J software based onthe phase II hardware redesign (HARD 5)Software changes implemented in this versionMultilanguage Human Machine InterfaceFront port communication available (RS232 port)BackwardS1CompatibilityCompatibilitywith previoushardwareV2.12 Two versionsHARD 3 orHARD 4(HARD 2 → *)V2.12 HARD 3 orHARD 4,HARD 2*(*See Notes)V2.12 HARD 3 orHARD 4,HARD 2*(*See Notes)V2.12 HARD 3 orHARD 4,HARD 2*(*See Notes)V2.14 HARD 3 orHARD 4,HARD 2.V2.14 HARD 5