P12x/EN T/Eb6 - Schneider - error

P12x/EN VC/Eb6Page 18/34Hardware/Software VersionHistory and CompatibilityMiCOM P120/P121/P122/P123Relay Type P122SoftwareVersionDate ofIssueFull Description of ChangesV6.F 08/10/04 Software changes implemented in this versionNone.Software improvements done in this versionImproved KBUS/COURIER protocol.IEC870-5-103 protocol: Enhancement to improve allthe system product line defect report (RFA disturbancetransmission).V6.G 11/01/05 Software changes implemented in this versionPossibility to come back to the head line of the menu bypressing Clear Button. The setting group change will bedone in exclusive way either by setting, either by logicinput. The logic input will be active on level. The choicebetween level or edge is suppressed.Software improvements done in this versionSoftware improvement done in this version WThe blockinglogic feature can be used with a temporisation of the phaseor earth current threshold set to zero.06.I 19/06/06 Software changes implemented in this versionNo Px2x relay blocking after reception of a timesynchronisation frame in T103Correction of SF6 front face alarm text and Start I> eventwhen IEC103 usedIDMT Rectifier curve selection coherency between P12xand MICOM S1.Correction of Start In> event in IEC103 communication(when going down).General trip correction in disturbance recordsUtilisation of nominal network frequency in the disturbancerecords (Comtrade format).S1CompatibilityBackwardCompatibilitywith previoushardwareV2.10 Two versionsHARD 3 orHARD 4(HARD 2 → *)V2.12 Two versionsHARD 3 orHARD 4(HARD 2 → *)V2.12 HARD 3 orHARD 4,HARD 2*(*See Notes)06J 04/08/06 Software changes implemented in this versionCorrection of trip Phase L1/L2/L3 events in IEC-103communication.V2.12 HARD 3 orHARD 4,HARD 2*(*See Notes)