P12x/EN T/Eb6 - Schneider - error

P12x/EN FT/Eb6Page 40/62User GuideMiCOM P120/P121/P122/P123Function P120 P121 P122 P123 INFORMATION and COMMENTSLatch tI> X X X X Time delayed first phase overcurrentthresholdLatch tI>> X X X X Time delayed second phase overcurrentthresholdLatch tI>>> X X X X Time delayed third phase overcurrentthresholdLatch tIe> X X X Time delayed first earth overcurrent thresholdLatch tIe>> X X X Time delayed second earth overcurrentthresholdLatch tIe>>> X X X Time delayed third earth overcurrentthresholdLatch tIe>>>> X X Time delay of derived earth overcurrentthreshold.Latch tI < X X Time delayed undercurrent thresholdLatch tI2 > X X Time delayed first negative phase sequenceovercurrent threshold.Latch tI2 >> X X me delayed second negative phasesequence overcurrent thresholdLatch Thermal θ X X Thermal overload information.Latch Brkn.Cond X X Broken conductor function.Latch t Aux 1 X X X Aux1 delayed by Aux1 timeLatch t Aux 2 X X X Aux2 delayed by Aux2 timeLatch t Aux 3 X X Aux3 delayed by Aux 3 timeLatch t Aux 4 X Aux4 delayed by Aux 4 timeLatch t Aux 5 X Aux5 delayed by Aux 5 time (option)Latch SOTF X SOTF function.Latch CB Fail X CB Fail function.AUTOMAT. CTRLHeading of the AUTOMAT. CTRL menu.Latch FunctionsHeading of the submenu.Latch OrderP120 onlyHeading of the P120 submenu.FunctionYesSetting choice Yes: Latch the trip output relay associatedwith the corresponding protection function. The relay willbe remain latched after the fault has disappeared.Setting choice No: The trip output relay will be activewhen the relevant command is active. The relay will notbe active if the relevant command is reset.Refer to previous table for protection functions list andcomments.